integra9023

Hey guys I just recently got two SA 8s and I am getting ready for a custom enclosure. I have been thinking about maybe upfiring them into the rear deck of my new Infiniti M35x and cutting holes for the port and woofers. The only issue is that I did this with some Image Dynamic 8s and wasn't thrilled about the how they sounded. Certain people say that give you a cleaner sound any input? I was also thinking about doing something funky like firing port backwards and subs up like you would in an SUV to see if that made a difference in the trunk. Should I just stick with the conventional trunk box? I was also wondering what people were running for box size (i heard .6 per sub with 12inches of port) I want something aggressive that will WOW the shit out of ppl I am running a Mmats 600.1d amplifier for power. Thanks for the help! Robert, GP Customs www.gp-customs.com

Hey guys I have a couple questions. I did a build on 2- SA-12" V.2 Nightshade and I had a custom box built that is 3.0 cf box w/ a port face that is 40x1.2" and is 23" long (specs I got from SA). The subs are firing up and the port is firing back at the bottom of the box. This roughly give me 48 inches of port tuned at 36 hrz, I heard from SA tech that I needed 15 inches of port for each SQ FT. It sounds great, the only problem is it doesn't sound as loud as my ProBox super bass box did. Any suggestions? I talked with SA tech again and they said raise the tuning frequency by cutting off a little off of the port. I checked with ProBox and the Super Bass Boxes are tuned at 45 hrz. It sounds a lot cleaner this way with the custom box but still not as loud as I am looking for. I am running the subs at 1 ohm each and they are being powered by 2 Memphis MoJo 2500.1 each at 1 ohm. I have two Kinetik 2400 backing up the amps, big three is done as well 1/0 Gauge Wiring etc. This is in a Dodge Durango. Any help would be greatly appreciated! Curtis, GP Customs facebook.com/gpcustoms www.gp-customs.com