trey4sports

I would say you're going about it as wrong as you can... ok, any idea what would be better? maybe 4 12" MAW's ported low? any ideas/ comments are welcomed

im just about ready to pull the trigger on a Focus Hatch and im really debating putting 4 18" MJ's in it (sealed). ive been wanting an SQ leaning S Q L setup for a while. The enclosure however would have to have 2 of the 18's firing up and 2 firing down. Does anyone know if this style enclsosure would even work? im not too framiliar with wave cancellation and other technical aspects but im just trying to get a feel if this idea is plausible. its this same concept however I would be building the box myself: http://cgi.ebay.com/4-HOLE-10-CHAMBERED-CO...1QQcmdZViewItem ALSO ive searched just about every MJ 18 thread on the forum and im still trying to get more feedback on how these subs do sealed? im looking for good low-end extension and above average SQ.

thanks guys

hey i saw the amp has 4x40 amp fuses. i have also talked to a couple sundown guys who say you can get 2500 rms at .5 ohms with 14 volts. i dont understand how you can get 2500 watts from 160 amp's ?? because 160 X 14.4 and 85% efficiency equals 1958 watts i dont doubt that the amp puts out the power i just would like an explination why

sure am, i fit 9 cubes in my range but when i looked at my friends grand cherokee i determined that 12 cubes would go abve the window line which isnt a big deal so i guess ill go with a Grand cherokee

lookin at buying a new vehicle and im wondering what the best vehicle would be for 2 18" BTL's ?? iwas thinkin Grand cherokee but i dont think theres enough room, what vehicles do you suggest i check out?

BTL's it is

awesome man, if you dont mind go ahead and tell me how your bro's Bl does with 2K. thanks and you can either post on this link or catch me on aim TREY4SPORTS

awesome man, if you dont mind go ahead and tell me how your bro's Bl does with 2K. thanks and you can either post on this link or catch me on aim TREY4SPORTS

nice job grim, dont ya just hate those kids who talk up POS subs?

yeah the install is def huge in your numbers but i compared his setup to mine because they will be strikingly similar. same subs both around 15 cubes both are subs up port back and both 4k rms total

im running a pair of either 2 bl's or 2 btls. both would be fully loaded and recieve a total of 4k rms as a pair

with 2K RMS should i go with a BL or a BTL ??? i hear most people run their BTL at like 4k rms or 3k rms and i would rather run a BTL if it wont be vastly underpowered....i was reading on the forum and i think it was tejcurrent who ran 2 18" BTL's off of 2 hifonics 2K RMS amps and hit right below 151. so if i ran 2k to a Bl would it get just as loud as 2k on a BTL ?