AP Zoutes

not really a wall seperating them but better bracing

wow that's quite and improvement...I will remember for future use

wwo motec sucks ass........bosch 24lb ftw...THE's why my project car uses

I spoke to soon....You should be OK with one 4" port. If 2ft3 doesn't include sub/port displacement then your actually around 1.7 ft3 and will need a 14.5" port to be about 34hz

nope 2 ports 26.5" long ea. but just go with the single port. IS 2 ft3 after displacements?

were you thinking of ordering it from there cause ya can't

both

IMHO the new Navigators suck...Look at a Denali or Escalade

yeah, that's right. But I would suggest two 4" ports to lower port noise. 2x 4" ports tuned to 34 = 26.5" long

audiocontrol LC6i http://www.woofersetc.com/index.cfm?fuseac...Product_ID=2868

I did this with fleckstone in a can. After this pick I did about five more coats...around 8 cans total. Looks good just be prepared to use alot ot get it even

I know the pic is small and I'm not saying I will do this(but hopefull) Should I be concerned about cancellation problems or is this design ok

since you obviously have both how would you describe the difference between the two

they don't have a recommended size for the 15" ssd sealed

In the technical section it's mentioned that there would be testing on running a 15" SSD sealed. ANy testing on this and any recommended enclosure size?