MKader17

jigsaw with a fine tooth blade with speed jsut fast enough to cut. too fast and it remelts back together wheeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee lol yeah that happenned I just cut it all and started swinging and ended up breaking it off

What the best way to cut plexi when you are cutting curves?

can you buy router jigs at local stores?

They haven't. SH!T. Mean's I'm going to bed at "3 AM" this evening

I can't tell if my clocks already set themselves forward or not.....

http://www.soundsolutionsaudio.com/forum/i...mp;#entry349474 Updated^^^

*Update* A good router bit is amazing! Clamped... and done Tomorrow I will pick up some polyfill, cut out the hole for the driver, finish up other tidbits, and start the staining/painting phase.

Wow, you have come a long way man. I am very impressed. Love the Decals as well!

Welcome to the site! We will need some information... What model is the amp? What model are the subs? What voice coil configuration do they have? Are you sure your amp is stable down to .5 ohms Truthfully, my post originally said, "If you have to ask, then you shouldn't do it." But since you were new to the site I figured you might be new to the whole learning curve. Some general facts... .5 ohm is usually a very hot, unstable environment. Very few amplifiers are capable of running that low and none are covered by any manufacturers warranty when being ran that low. The only way to run two subs at .5 ohms is to have 2 2ohm DVC (Dual Voice Coil) Subwoofers

I've been home for 4 hours and my parents are already driving me crazy

Slow H0P tonight. Of course it usually is on sat. Waiting for glue to dry. I have to say one thing. Good router bits are friggen amazing!!!

<---- Had no clue that Icon's performed in such small enclosures

or just run a kicker ZX850.4 with a Sundown 1500D and call it good With electrical upgrades of course

I think M5 just spent a lot of TMAX's money lol

optimum

Tomorrow is my last day in Beaumont, then back to the BIB's

http://www.partsexpress.com/pe/showdetl.cf...tnumber=300-804 Think I'm going to try these out

Alright, so I have been without any real tunes for quite a while lately and I think it is really starting to kill me. So starting this weekend I'm going to get the music on my Ext HD's straightened out and start this build... Zaph Audio - Slimline Wall Mounted Speaker - Part 1 Zaph Audio - Slimline Wall Mounted Speaker - Part 2 To power it I will be using a reciever off an old "surround" setup that I have. Plans are to also add 1 (maybe 2) MLI-65's for sub duty probably up to 80-90Hz ish (Sorry Sean). First Questions.... Where do I order parts for the crossover? Want to order them and the speakers as soon as possible with hopes of it getting in by this weekend. I know the grounding symbol doesn't mean you actually ground the wire, but what does it mean? It seems to me the design does not incorporate a high pass filter for the drivers, how do I incorporate this into the crossover design? Thanks

Yep... this water hose will clean it right up!

The brunette sister has a gorgeous smile The brunette is my crush she was gorgeous in The Notebook as well not that I've seen that movie before....

and T0PPage!!! out for the night work in the AM

Updated with some more questions http://www.soundsolutionsaudio.com/forum/i...mp;#entry348870

A little update on this project. It has gotten a little back burnered because of the BIB's but definitely not forgotten. I haven't been able to build anything lately so my mind has started brewing on this again. I want to keep the slimline design (build whenever I can get the Aura drivers) and for sub duty I want to throw in the new Sundown 8's stereo and cross them in at 120 Hz. For the slimline's I want to throw a gfa-535 at them (60W). and at 60W Zaph says the speakers can only take excusrion down to 120Hz (how convenient eh? ) For the 8's I'm clueless at the moment for amplification the drivers are 4 ohm and rated at 200 but I really think I would be very happy with 150W ( this is a small room with all this power it will be loud in here). Suggestions? Also I would run this all off my laptop with no pre-amp so what modifications shall be required? I know I could probably get away with headphone to RCA and split the RCA's but I'd like to explore some better options. Last thing is how will I HP the slimlines over at 120 Hz?

Probably the most bad ass statement you could make about your car Very Chuck-Norris-esque I like Convo: Friend A: My 4 cylinder get 35 miles per gallon Friend B: Well my hybrid get 52 MPG Bigjon: Yeah well I jump start 18 wheelers.

uhhhh? "...and I could see the squirrels, and they were merry." It's the "Can I have my stapler?" guy. I thought they were married....