michael

Can I get a recone for 2 jl 12 w6's? My boy just smoked them and gave them to me. The only specs that I could find was, 300 watts rms, 2.5 inch coil, 11.1 xmax, and they are dual 6 ohm coils. And the dust cap comes with the recone? And what would be the new spes with the recone?

I want to get them reconed because the do sound good and hit hard. Plus I have a 1989 Bronco on 53 inch V-treads(6000$), 5 ton rears(3000$), and one sick 460 worked to a 488(11000$) with 600hp+ 250 shot of NOS!!!! I dont want to spend any more money on the bronco so thats why i wanted a recone. But i guess i wil have to get new subs. I see 2 15'' Q's going in there very soon. I have to many toys so the wife is bitchin about everything i buy. A list of my toys- 1989 bronco, 2003 Excursion, 2003 mach 1, 2002 raptor 660 worked to a 770, 2007 raptor 700, 2005 Hayabusa soon to have a turbo, and i want to get a new SRT8 Charger and sell the Mach 1. I waste MONEY and lots of it!!!!!!!!!!!!!!!!

Jl told me that they dont recone subs that old. Can someone tell what to do with them other then putting them in the trash. I know i can recone them i just need to find a recone kit.... any help

Thanks...

I took my box and 2-18'' Q's to get airbrushed. My box airbrushed to look like the cube from the movie Hellraiser and to have all my favorite horror movie people airbrushed on the whole cone. The shop next to it caught fire and burned up all the stores in the little strip mall. So I would like to know if I should get the new Havocs or stay with the Q's? The Q's hit hard and loud but I think the Havocs would hit harder and louder but I need them in dual 4 ohms. The Q's are dual 1 ohm. I need to run a 1 ohm load to my amp for full power. I have the MTX TE4001d. 3900 watts at 1 ohm, 2451 at 2 ohms, and 1323 4 ohms. Box size 7 cubes each after port tuned to 30hz. So would the Havocs do more then the Q's? And can I get the Havocs with 4 ohm coils? And can I use the same box design with the Havocs? (7 cubes 30hz) And I like the 30mm of xmax that the Havocs have. And the BL would be good for me to but site said that it only has 21mm xmax. I want excursion. Can I get alonger coil? More air moving = tickets...

why not? they don't have 2.5 inch coils Do you know where i can get a recone without going to JL for the recone?

yes the whole strip mall and everything in it. The guy Dru who is airbrushing my things is cutting a check for my subs and box like today. I can control the gain so i wont kill the Havocs. Think the Havocs are a better sub or should i stay with the Q's or BL's? Want it loud and low with crazy bass!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

why not?

well anyone?

I have a excursion w/2 -18 Q's and want to know if i can tune them to 30hz instead of 28hz? and should i have the port and subs firing to the rear or facing up? all my boxes always had the port and sub on the same side.I would face them to the rear. I would face my box up and the bass cuts in half. Will this do same if i face the subs up and the port to the rear? I want to get the most that i can get out of subs and box. Any input....

What sounds better? To fire them towards the rear? Or the port and sub on the same plane?

I have a excursion w/2 -18 Q's and want to know if i can tune them to 30hz instead of 28hz? and should i have the port and subs firing to the rear or facing up? all my boxes always had the port and sub on the same side.I would face them to the rear. I would face my box up and the bass cuts in half. Will this do same if i face the subs up and the port to the rear? I want to get the most that i can get out of subs and box. Any input....

the 2 ohm coils have more bl then the 1 ohms coils. so would that mean that the 2 ohm subs would hit harder??

Can I get 4 ohm coils in the Q line? And would the 4 ohm sub have more bl?

Out of the Havoc 18'', Q 18'' w/bp, and a 18'' Bl loaded with 1500 watts which one will - 1.Hit the hardest 2.Move lots of air 3. sound the best at high volumes 4.Hit loud and low 5.and smoke the new orion HCCA 15. So which one will do?

Where did you get the brackets made that hold the alternators? I have a V10 excursion and would like to run 3 alternators. 1-200 amp for the stock alternator to only power the truck and 2- 300 amp alternators to only power my system. I need to know where you got the brackets. And you system slams!! Thanks for the help... and did I say that your chit slamsssssssssssssssssssss!!!!

Can someone tell me if this port size is right for what I want. Box size is 12.91 cubes after subs and port displacement. the port size is 23hx7wx14.56d = 32Hz. Is this right? 2-18'' Q's will be used in this box. Looking for it to hit really hard and will this box hit loud and hard? the subs will see about 6.45 cubes each. Is this box good for the Q's to hit really hard in?ready to build today....

You did have 6-15'' BTl's before right? Why the change to the Havocs? I was going to run 2-18''btl's but then I heard 2-18'' Q's in a excursion like mine and it was sick!!!! I really like the way the havocs look but can they hit harder then the Q's? I heard that the havocs are more like the Bl but with SQ. Can 2-18'' Havocs stomp the Q's? I want it loud and low with and to do some hair tricks!!!!!!!!!!!!!!!!!!!

will there be a new cone design for the Q line or any line? Maybe something that looks like the new AA Havocs. Make it an all black cone with the with the Fi logo painted on the bottom of the cone in flat black. Something like the havocs or the w7's. And since the subs are made to order, you could do any color that the buyer wants to have on it. Sound good to anyone???

When will the website be up and running?

What is the weight of the 18'' Havoc? And will it bang harder then the fi 18''Q's?

Where would the new 18'' havocs be if they where in the Fi audio line?

can 1-18'' BTL rip my Excursion apart with 4000 watts or do i need 2 of them? What can 1 btl do with 4000 watts or 2 with 2000 watts to each? what to hit high 140's maybe low 150's could 1 btl do this? Or would 2-15'' BTL's be happy with 2000 watts each? my boy stuck his one 13'' w7 in my X with 1300 watts and my truck was going to fall apart, but i hate jl and he has 2 w7 in his X and i need to put him down. And i need to do hair tricks.Thank Guys... mike

I'm ready to buy 2-18'' BTL's and would like to know if I should have the subs firing up with the port or have the port firing to the rear with the subs up? The box I have now sounds the beat with the sub and port firing to the rear doors. Any help would be great. Looking for the box to SLAM!!!! Each sub wil have 2k each for awhile until I get 1 more TE4000d. Or could 2-18'' BL's do the same will the power I have now??? Want to hit 150db or higher. Thanks

I'm going to run 2-18'' BTL's each in there own box with 2500 watts to each sub. I would like to know if 6 cubes each would be good for the power that i'm running or should the box be bigger to reach full xmax? And do you have to add the ports size to the size of the box or not? I know you add the sub displacement to the box so do you add the ports to??? Want to run 2-6'' Precision Ports pre sub tuned @32hz. Does this sound like it would work? Want LOUD DEEEEEEEEEP BASS. And what is the disp. of a fully load BTL? Any help would be great.