emperorjj1

go sealed... without driver specs u can never get the "right" box

dark side ftw

lol my 7 and 8 sound pretty darn good... but ya tuning a 3way active setup is a bitch

looking for more midbass? or whats the goal?

not really. Damp pro is basically 1 and a half the regular damplifier. Damplifier alone is comparable to (in thickness) alot of the other butyl products out there and damp pro is just that much better. A good way to look at it is how much coverage your looking for, how much money your going to spend and how much your going to buy. When comparing 80sq ft of both the damp pro isnt that much more price wise.

new ones are sorta crap

if only i knew... We build a 2 10s box for 2 SE's that was designed by david and its the loudest ive herd in that style mustang yet

same... common ground

well we had one 16yo girl with 2 12s on 2 powerbass 2kw amps and she didnt have much issues but at the same time ive seen people burn coils with less the the 1k rms rating

i prefer the kinetik myself but they are both deep cycle agm batts so

ya the SX's arent really meant for that power.

true but my line of thinking at the time was i figured if im going to add a second alt why not I just added the fuse for the amp and lets just say wow. I have both the gain and output control on my processor all the way down and it sounds just about even with the mids/highs

cool 18 thats what i wanted to know ya i only do spl comps 3 times a year or so... i'm mainly concerned with daily continuous time.

RE has done us pretty well at the shop

thats really the only way to do it. your fine

sry missed ur post 80in.... im running 2 hc16v's and i have the subs wired to 1 ohm. Im probably never going to have them at .5 because they are quad wired in series inside the box and id rather not take them out again

if 18.0 is the limit i dont see an issue of running it at 18 instead of 18.8 i can always bump up the voltage for large draws and back down as necessary. Hence the necessity of the guage

that's what i'm sorta worried about. and i cant really expect much resistance with the wires since there amp is so close to the battery and i'm using 2/0 wire

ya ive been told to charge the kinetiks at 18.8

That would be 2ohm daily or 0.5ohm at comps. ya i know but he keeps on asking about 1ohm and .5 maybe he has quad coils

bump the sx tuning up and u can get more volume.... ive herd them tuned as high as 40 (minus a wall) and 35-38 is the best compromise of spl while still getting the low bass SPL your probably looking at the SX, T2, Brahma then hx2s I would personally choose the brahma since i have XXX 15s but they all sound like nice systems

just do all your wire jumping outside of the box... by either utilizing the dual terminal cups or d blocks if ur stright wiring it. Then you can run 1ohm daily and .5 at comps

mind you the RE SE is a triple stack as well. I could be completely off base but the mag looks more similar to the SX then SE

sry i dont know much about Eclipse or alpine HU's... when i was looking into the alpines it seemed as if they all relied heavily on the alpine processor to do anything worthwhile, Hence why im not getting one

the GM large case ohio gen i used for my second alt is a one wire setup. Gus asked if i wanted the one wire alt and i gladly took it