Grim

Doesnt seem like alot of air space for those subs... I might go with those exact dimensions for my 18in Build..

Tremor, I love it. Can you give me the specs on that box. Dimensions, Volume?

40x...... Cant be anymore than 40 wide...no deeper than 26in... I guess I can go up to 20 tall... This summer I may invest in a LCD rear view mirror...then disconnect the backup camera from my Head unit and plug into that, that way I can build a wall and use alot more space....for now, I need to be able to see out back

I know this is a couple weeks old but i gotta respond to this. I may not be the most knowlegable box builder in the world, but I do know woodworking... 1. You dont want to use gorilla glue for a box...trust me, just dont 2. Even if you could, these no reason. Wood glue is PLENTY strong and with wood it can be and usually is stronger than Gorilla Glue.. 3. No need for the biscut joints, but would be interesting. Either way, you dont have to be any better, just grab some clamps, some titebond or Loctite wood glue and build the box...its not hard...

I know, right...

Alright, i figured one thing out, when i first set it i had the bEQ turned up a little, now its down to 2...cause i was fudgeing with it last night. Can it hurt anything by turning it up? Should i pull out the DMM again? Maybe I just lost the Wow factor. I mean at first it just felt like it moved my whole body...everyone else is impressed, and well its definitly loud as fudge from the outside..

Much Cleaner...

yes, thats what the hole on top is for

Speaker porn is the only way to go

Well After thinking about it, I guess ill just need to go taller..i didnt want to because if If i keep it under 17in tall, I can use the tannoue cover to conceal it when parked.... So can anyone help me out with the box? Im thinking 8 cubes at 32hz... I just need to know what I would have to do for the port if I wanted to fire back....and out the bottom...

Quite Honestly, the rear cargo window moves almost 1/4in away from the seal when the bass hits, so that very well may be where the air is going. I have more to say but i took this time off from work to go pick up my dog from the hospital after a long couple weeks...so ill write when i get back and get him setteled in..

Well I had been planning on doing this anyways, but now i suppose I have some incentive to get it done faster... My Current System Consists of Pioneer P5700 Head Unit Infinity Kappa 63.7i (3way 6.5) Infinity Kappa 60.7cs (6.5 Component) Alpine M1005 Alpine F545 Previously 2 Alpine 12in Type R's Currently 1 18in Fi BL I am using a 6^f box @ 32hz w/ 95.625in of Port Area I will be rebuilding soon. This box is awesome, but is about 3in to wide, and i want something that looks better(planning on fiberglass) The Amps(Excuse the Mess..it was when I first set them in there) Speakers Head Unit Remote Interface Subs!!! Installed Vid 1/3 Full Volume 1/2 Full Gain Volume Any Questions Just ask me I will go into more detail on everything in the Review Thread...

Thanks one question, if my electrical is 13v how am i keeping it up around low 14's high 13's all the time? Im going to work on designing my box tonight. Any advice on making the port on the bottom....I dont know how to do it without screwing up the tuning... And will the port fireing back into my Cargo door cancel anything out?

Well My biggest problem is theres so much unused room...and i cant use it even with fiberglass as I have to be able to get it in my fudgeing jeep lol...I mean theres litterally 5 cubes or so that i cannot figure out how to capitlize on.... And how do I make the port area bigger without changing the tuning...

i honestly feel they were louder when I first got them as well... I have no clue how to build this new box...I mean I have so many different ideas running through my mind.

How about bigger box and more Port area? As thats what I was planning on anyways...

Just the big three...And its a prety under rated amp...My Voltage stays at around 13.9 and drops to low 13's in big hits...

95 Sq/In It definitely sounds good(adise from the roof flex on the outside) just thought it should be pushing more air Can it take 1500w? Its only a BL with P Chamfer I liked it when it was port/Sub Forward.. I think on the new Build I am going to go with Port Back and Sub Up..

6 Cubes @ 32hz...

1000w Alpine m1005 In a Jeep Grand Cherokee

nope..

You should get an e-mail with a tracking number...which takes you to the FI site, and shows the status plus your other info

Hey man how much of a difference does that Epic make? Iv been thinking about picking one up... Im going to get it metered next weekend. Im kinda scared...i guess i always just think for the worse, but i dont think im going to hit what I want...(140+)

Welll I have already decided to go bigger(And i love building things)...So this box is up for sale. Its only been used for a week, but will stay in my jeep untill its sold...if its even sold. I didn't build this to sell it so I'm not asking much... 110 + Shipping... I will replace the carpet before hand as I ran out of carpet the first time lol so the bottom part isnt fully covered... 6 Cubes @ 32hz with 95.6 Sq/in of Port Area Box Dimensions are 16.5 X 45 X 24 Sounds AWESOME...

Neither can I lol...The faces people make when the bass drops is to funny