Fi Car Audio

We can send you one to the zip for $13. Paypal can be sent to [email protected] And this is for a BTL15 with 3 magnets correct?

We still have quite a few of the 10s and 12s left. We sold through about half quickly and the balance has been slow the past week. As for 8s... sorry. While I can build them thats what AA is for.

Thanks for the kind comments... We try Let me know if you have any issues getting things set up correct.

Id say about a month and we will have them up. If I get them done before then Ill post them here.

Sub should have shipped out over a week ago. I will check first thing tomorrow. Corey took care of payments and everything... let me check the ship log when I get into work and Ill get back with you. Thanks, Scott

Not sure what your name or what recone it is???

Sent via USPS priority service. Normally 2day but 3 at max (which puts it at Friday). Thanks, Scott

Sub was finished last week and markerd off of the build list. It is not showing as shipped, but I will check when I get into the office in about 2 hours. Ill let you know where it is and Ill make sure that it gets to you before then.

Will do...

Nice to meet you... We werent locked in enough given that there was the walkway in front of us (which was nice as it scared MANY a pedestrian when it went off). Next year we will be back with a MUCH larger system and we will make sure that we are locked in deeper in the pack (although we did have a great spot as everyone had to really pass by us). I wish we made a 10" that could do that

Sounds like we could get something to fit. The largest ID we have is 3.018" so Im hoping that there is enough pole-vc tolerence to support that. The best way would be to send it in so that we could measure and spec parts from there. Thanks, Scott

Yes we can recone them and we have a variety of parts that can be used for different applications. As for 2500W for daily... probably not. There simply isnt any real cooling in that motor to support it. While we could modify things some, we can machine on a premade motor to really bump things up. D1 coils isnt an issue. Does the motor have the standard 6 mounting holes on a 5" pattern or is it one of the other versions?

Email sent

Not a problem at all. Let me know if I can help with anything else with the project as well. Thanks, Scott

Send a self addressed stamped envelope to us and we will stick a couple and drop it back in the mail for you. 4" stickers are free Fi Car Audio Attn: Stickers 5480 Cameron St #107 Las Vegas NV 89118 We will be adding an apparel section to the Fi site soon with stickers, shirts, and some other items (hats and hoodies). Ill get a post going soon about what people want on the hoodies for fall/winter. Thanks, Scott

Too cool! My wife jokingly asked if I was going to carve a Fi or AA pumpkin... but I had mentioned that a couple others might and Id leave it at that Excellent use of shirts...lol

With 5-600W the SSD would definitely be the better match. I believe you are the one we sent an email requesting info for the differences between shipping addresses and names (we had two others on the same day for SSD10s but not from Lizton) Check and let us know. Thanks, Scott

Agreed with above... dont do the extreme leads for daily. And the pole chamfer is included with the cooling package as well. Most people tend to run about 1500W to a BL with cooling and the flatwind. There are those that run more or less as well, but it depends on your setup and abilities to get things dialed in correctly as well. 7-8 cuft tuned to 33 makes for a good daily driver that drops deep and still hits solid. Please let me know if I can help with anything else. Thanks, Scott

Email sent. Sorry for the delay in response we have been caught up with the SEMA show for the past week+ and are just now wading though the several hundered emails we have built up during that time. Like I have told others about doing a Brahma 18"... we can do it, but it wont be the most useful of subs going. The Qts will be high and I have always said that the 1600W RMS rating was nuts. Id call it 750W at best. Itd be an original single spider with a lighter curvilinear cone to try and keep the moving mass down. Yes, we can do it... but dont expect it to fit in a "small" enclosure. Thanks, Scott

Most people are running 1500W or so to each for a solid daily setup. There are people that run more and less... just depends on your setup and listening habits. With the cooling and flatwind it takes you just about up to where the standard BTL does (at about 2000W RMS). But you will need to make sure that the gains and subsonics are set correct to avoid issues. Thanks, Scott

7.5 cuft tuned to 33 should make a solid daily setup. Will these be the new 6" round aeroports, or just PVC or the like? If its aeroports you can get away with a pair of them... although its less than our recommendations for port area, the flares help greatly vs a standard slot port. If its PVC, then probably 3 of them plus rounding over the edges as much as possible. Thanks, Scott

It looks to be a strong amp that should be more than enough for a fully loaded BTL. Pay close attention to the subsonic filter settings as that can ruin things rather quickly if not dialed in correctly to the box with that much power. I have yet to run accross one of those amps, so I cant truly say how "good" it is, but Im sure its fine. Kinetik will help things, but 90amp alt wont keep up for too long before you start to drop voltage. You will definitely need to get a larger alt to help things along if you plan on running it hard for too long. System in general should be solid (with the exception of the alt).

Thanks for your patience Phil. We just finished up SEMA and are trying to get back on top of the several hundered emails that have built up over the past few days. A. 11.000" B. 9.250" C. Slightly under 6.500" D. 7.480" E. 3.543" F. 3.582 G. 2.875" H. .472" I. 1.575" J. 1.535" K. 1.500" L. .125" M. .700"

Have no clue if its cancelled or not... but they were exceedingly annoyed with us... enough so to finally get us removed from the show. There were about 60 people yelling to let us stay and that followed Chris and the H2 out of the show and to the streets (going as slow as he could banging it all the way). I think the H2 made one heck of an impression on all that heard it (more stories about just how far it could be heard later...lol). Not sure if I got a chance to chat with you or not... but glad you got a demo of it.

Sorry... AA hasnt had any of them in a long time. The new version is a decent upgrade from them