Fi Car Audio

SSD magnets are 6.70" in diameter and the Qs and BLs are 7.50" Thanks, Scott

Hmmm... Ill check first thing in the morning. Sub is done and should have shipped, but at the same time you should have received a number for it as well. I believe you had mentioned this was for an customer install too... Ill let you know tomorrow and get it to you in time no matter what. Thanks, Scott

Been done and got us kicked out of SEMA for being too loud lol We have been too busy over the past couple of months to have the time to get a solid set of pics taken of it. It is a very solid vehicle to say the least, from the 3"+ thick enclosure walls to the 2" MDF molded in "headliner". The H2 is a very solid platform as it is and there is relatively little flext to it... but it still does. Ill see if Chris and I can take a little time next week and do a decent shoot of it. We will need to anyway for the gallery on the site.

OK good... I was getting worried about that one. Must have been a magnet defect to begin with... then with a little rough shipping it didnt help things Id say. First issue we have had like that.

What??? You had a magnet crack on yours too? If so let me know ASAP as my magnet vendor is in town and I met with them on Tues. I will find them ASAP and get something resolved. When did you order this?

No Tracker... USPS. Id figure it to be there Sat. Ill check with Pol to see what day it shipped. Thanks for your patience.

We actually received that from FedEx this morning and it was brought to my attention before I left for some meetings. We will get a new one built up and out in the next day or two... I sent an email as well. Thanks, Scott

On here for a minute or two to put out some fires Been beyond busy with holidays (2 short 3 day weeks) and CES this week. To be honest this is the first time I have been on here in 8 days. Meetings are done on Friday and Ill be back on here like normal on Monday. I appreciate everyones patience and Ill have a couple new clothing items to post up as well.... and maybe a hint about something new Thanks, Scott

Awww.... sorry. They must not have put it in there or paid attention to the note when packing it. Definitely sorry. I will gladly send one out for free... and a shirt, stickers... whatever to try and make up for that one We have been swamped for the past 3-4 weeks with holidays and CES approaching. Finally seeing a light at the end of the tunnel with only 4 meetings tomorrow and 1 on Friday. Next week things should get back on track. I do have to appologize for the delays and for not getting the gasket in there. If you can, send me an email to [email protected] with your name/address so I can get one out tomorrow. I appreciate your patience and Ill be back on here daily next week. Thanks, Scott

PM sent... thanks

We are thinking of doing a BR version of the Qs and SSDs as well... a couple small tweaks including a 4th spider on them specific to ported bass race applications. We had one competitor using these mods and feeding his Qs 3000+W each for his bassrace runs with excellent results. Of course we wouldnt rate them as such. Usually 200-500W with the BP option... BR is simply a little more than that and a fair amount more mechanically. Thanks, Scott

Split on that one... depending on power the standard 2 magnets with SPL option and pole chamfer work well. With more power 6kW+ per sub, the 3rd magnet, SPL, and pole chamfer do well. We have people with close to 20kW per sub with the 3rdmanget SPL versions doing great (taking dB Drag world finals in 3 different classes with them). Thanks, Scott

Size reduction and a flatter in car response... but at the loss of a good portion of output near tuning. As mentioned above, its a relatively cheap thing to try and see if you like the sound, but be advised that if you are happy with the output now, it wont be there when you port things. Thanks, Scott

Looks like it would be an extra $89 to ship it via the postal service priority shipping (6-10 business days). This is hwo we have shipped to Romania in the past and it has worked well. Thanks, Scott

A pair of D1s for the 1500, or a D2 Q for each 1000. Like Brian mentioned, 6cuft is more than enough for a solid ported setup. Are you going for a loud daily driver, SQ oriented, mix of things??? 4.4 cuft tuned to 30Hz for the pair is a solid low tuned setup. Bumping things up to 33Hz increases the output in that area a little and is a great all around setup. Slot or aero ports would work great. We recommend 12-16 sqin of port per cuft of enclosure for standard slot ports. Aeros dont require as much port... (1)4" per sub is on the small side and Id look to (3) of them for a common chamber enclosure for the pair of subs. (3) 4" ports at 18" long tune you to 33Hz in 4.4 after displacement Thanks, Scott

message sent. Thanks, Scott

Ill check emails and see if I can find that one... if I can, Ill gladly send it out for free. Thanks, Scott

PM sent

We have about 22 12s left as of last count I remember.

Older XXX were solid subs. Always can recone those things if needed too. Decently sought after motors at this point.

No it did not include the basket gasket or terminals. If you sent it in we could spec the sub for you as well. This would give you full TS params and let you know what enclosures would work well with it. But, from doing some basic FEA based off of what I "think" the motor has in it, Id say that the qts would be a little bit too low for a IB sub. I prefer qts in the .6 or slightly higher range for most applications. Thanks, Scott

If it is going to see music in a daily or any sort of crossover application (that isnt SPL only) then get the daily version. The SPL is for SPL only burp applications. We recommend 12-16 sqin of port per cuft of enclosure space. Thanks, Scott

Yes, regular leads on this one. Cooling is a function of the motor (which doesnt change) and they did have the flatwind in it.

Its on its way... Im hoping it gets to you before Friday... Not sure how things are going given the holidays and shipping delays. Looking like his package took 8 or 9 business days. Im hoping things get pushed through faster. Ill call for yours this morning to see if it has cleared customs yet as well. Only issue with Postal Service is the lack of a tracker... although the savings in brokerage and taxes makes up for it. Thanks, Scott

Excellent... I wasnt sure how the holidays were going to play out, but considering it had cleared customs it usually only takes another day or two once in the hands of the Canadian postal service... Let me know how the other kit works for the MT as well... Thanks, Scott