gopala33

here screenshot compare BTL and Q here link http://img202.imageshack.us/i/comparea.jpg/

Compare BTL and Q see screenshot

here screenshot compare BTL AND Q

Uhm..the fs ranges between 33 and 39hz. The N2 is for Daily Groundpounding. Even with the fs at 39hz, you'll be able to GTL very well. Its mostly in the box man... 10% Equipment and 90% Install ok BTL N2 Fs 33hz right so u are sure will do FR 20hz will louder ??? good output ok i understand BTL so much power 2000Watts rms that great but i saw Fs is 51hz but not much deep bass if FI BTL u are sure will do Deep bass high output will do deep bass louder ??? like FR 15hz and 20hz like that deep bass I wasn't telling you the BTL could handle anything less than 3000rms. But the other guy who doubted what I said. But to you, if you don't have 2000rms to give the BTL, there really isn't a need for it. If you have a 1000rms plate amp per say, a Q will fit your needs better. I gave you a list of which sub for which power level. As long as you keep it between the guide I told you, and isn't stupid, the one you pick will be just fine. Its takes quiet a bit of power over rated to actual burn the coils of these subs. Unless your clipping the hell out of it. i can buy AMP too for 2000watts no problem u are sure Fi BTL will do FR 20Hz louder for good output ??? i need so much deep bass BTL N3 OR BTL N2 ?????

ok i understand BTL so much power 2000Watts rms that great but i saw Fs is 51hz but not much deep bass if FI BTL u are sure will do Deep bass high output will do deep bass louder ??? like FR 15hz and 20hz like that deep bass

BTL is the best at what? If I need a sub to match my 500rms amp in a sealed box, would you suggest I get the BTL, no. So STFU. Each sub has its own duty and application. OP- IB3 is a infinte baffle sub, if you don't know what that means, that isn't for you. Plus Fi discontinued the IB3 and it will be moving to their HT line, BluePrint. Picking subs needs to be based on a few details of the install. Power,enclosure, and what your looking to get out of the setup. Sealed enclosure, X, SSD, and Q are the options. X- <400rms SSD- <1000rms Q- <1200rms. Ported, all will fit. X-<400rms SSD-<1000rms Q-<1200rms BL(3inch)-<1500rms BL(4inch)-<2000rms BTL N2-<3000rms BTL N3- is a SPL only sub. Also the BTL N1 hasn't come out yet so I can't comment of it yet fully. As far as Fs, I'm not sure which coil option specs are listed but the HiXmax coil BTL has great lowend. Hope this helps. Also giving us more details of the install so we can better answer your questions. i prefer proted subwoofer are u sure BTL Will do Deep bass like FR 15hz lower for deep bass high output i know if high Fs 51.1 Hz i think deep bass 15hz or 20hz low output that cannot high output so how

BTL is the best at what? If I need a sub to match my 500rms amp in a sealed box, would you suggest I get the BTL, no. So STFU. Each sub has its own duty and application. OP- IB3 is a infinte baffle sub, if you don't know what that means, that isn't for you. Plus Fi discontinued the IB3 and it will be moving to their HT line, BluePrint. Picking subs needs to be based on a few details of the install. Power,enclosure, and what your looking to get out of the setup. Sealed enclosure, X, SSD, and Q are the options. X- <400rms SSD- <1000rms Q- <1200rms. Ported, all will fit. X-<400rms SSD-<1000rms Q-<1200rms BL(3inch)-<1500rms BL(4inch)-<2000rms BTL N2-<3000rms BTL N3- is a SPL only sub. Also the BTL N1 hasn't come out yet so I can't comment of it yet fully. As far as Fs, I'm not sure which coil option specs are listed but the HiXmax coil BTL has great lowend. Hope this helps. Also giving us more details of the install so we can better answer your questions. i prefer proted subwoofer are u sure BTL Will do Deep bass like FR 15hz lower for deep bass high output i know if high Fs 51.1 Hz i think deep bass 15hz or 20hz low output that cannot high output so how

my neighbors wont complant because my place a lot shop and near video shop they got PA Speaker 9.30am open shop they wil play very loud and to 10.30pm close shop so they will stop songs 10.30pm night to i can hear sound with my house lol PA Speaker not much deep bass lol BTL is High Fs but low deep bass low output that is bad i need deep bass high output for lower Fs so how

Fi BTL Fs: 51.1 Hz its very bad if lower Fs that mean will de deep bass high output right if higer Fs that mean will not much deep bass but low output right that i realy need Deep Bass so how