alexsimpson2010

i greatly appreciate the help something simular is what im attemping could you please provide me with a cut sheet or some measurements

wood thickness: 0.75 width: 37in depth: 13in height: 12in port width: 3.25 port height : 10.50 port 1 length: 9in port 2 length: 28 in attempted tuining :35hz attempted box volume 1.5 cube ft

subs are dual 2 ohm they are wired to 2ohm on 1500 watt amp

sorry but i can not seem to get a picture to copy and paste probably because i dont know how.... but enclouser has L shape port 3.25 in. wide.... port 1=12in h x 9in length x 3.25in wide and port 2 12h x 28in length x 3.25 wide (total enclouser) 12h x 13d x 37w i calculated this with the (re box cal.) 1.50 cb. after displacement tuned to 35 hz (sorry i cant get my pictures on here). but this really has poor results.... can you possibly suggest a enclouser build for these (2) sa-8s..... i guess cut sheet so i can get this tuned right (35hz)..... thanks for your help....

ok ssa family members i sure could use your help.... i have 2 sa-8s.... i built a slot ported enclouser.... 37w/12h/13d = 1.5 cd. after port/sub displacement.... i ported this ecclouser 3.25in. wide port 1 was 9in. and port 2 was 28in. long.....35hz..... poor results.... im wondering if port width may be to wide.....this enclouser build just doesnt seem to have decent deep bass.... im thinking possibly aero port enclouser build now.... im using dual 2ohm subs on 1500watts..... 2 ohm load....i need some real experienced advise since mines a failure.... i know best recommended 1.2 cubes now how about this porting issue.... help... help.... every day w/out bass is a day in hell.... its my only escape from the ole lady and reality..... yes i could go with much larger subs.... been their done that....with fi-bl 15s.... im 50 yrs old now and just looking for a smaller set up but yet decent bass.... and these little puppies have it in them.... i just have to build a enclouser to bring it out.... any suggestions and help would be greatly appricated..... thanks to all.....

well ive only built slot ports in the past.... but which do you suggest..... im defiently wanting the best possible bass and lows these sa-8 are capible of...... im open to suggestions.......

ok thanks this is what help i need...... can you possibly suggest a enclouser size that will fit on the back seat..... and measurements, port width-lenght, ect.... your help is greatly appricared.....

yes i have fab few enclouser and this will defiently be a task.... so for now i just want to build a enclouser to place on the seat that i can remove when needed....

sorry about the caps lock..... on the dimensions im just for now going build this enclouser to place on the back seat..... so that i can remove it when necessary...... so im pretty open on enclouser w/h/d .... like keep it under 37in width..... hight and depth are more than needed......(2) sundown sa-8 on 1500 wt. port/tune to around 30hz....... i need some suggestions on enclouser size best tuning for lows (daily)....... measurements.....

THANKS FOR SUGGESTIONS AND HELP.... IM IN PLANS FOR BUILDING A PORTED BOX FOR THESE LITTLE MONSTERS (2) SUNDOWN SA-8..... I WILL BE POWERING THEM WITH A 1500 WT. MONO AMP...... LIKE TO TUNE THEM IN RANGE 30 HZ...... NEED GOOD EXPERIENCED SUGGESTIONS ON BOX BUILD AND MEASUREMNTS PLEASE...... THESE ARE GOING IN A 2002 AVALANCHE....... I WOULD LIKE TO PUT THEM UNDER THE BACK SEAT,IF THIS IS POSSIBLE...... BUT FOR NOW IM WILLING TO BUILD BOX AND JUST PLACE IT ON THE SEAT ITSELF..... I DONT WANT TO DO THE BEHIND THE SEAT CARGO GATE THING...... I JUST ELIMATED THAT ORDEAL 2 L7 15s ...... BUT THANKS AGAIN FOR ALL/ANY SUGGESTIONS HELP AND MOST OF ALL I NEED SOME MEASUREMENTS....... IM NOT TO GOOD AT FIGURING AIR SPACE CALCALATING PORT SIZE , LENGHT, DISPLACEMENT, ECT.......

i need help with measurements for a enclosure build for two fi bl 12 tuned to 32 hz. i can build this enclosure up to 4ft wide 18in deep 18in tall im looking for this to be a 5 cb ft volume... thanks for your help i need all measurements and slot port width lenght measurements... again thanks...

i have a hifonics bxi 2008d brutus amp on a new bl 15 d2 and i have my gain cranked up to 3/4 on mine also having to use bass boost on amp aswell im not very happy with this amp on this sub it has worked well on others but not on this bad boy so im considering differnt amp. mine hits pretty hard but not enough to flex silverado ext cab 4 cb box tuned 32 hz down fire. im still tweekn h/u and amp trying to get this gain level down and bass boost off amp ive seen several other set ups on youtube with these hifonic amps on these bl 15 some of ya chime in please with some suggestions... thanks...

thanks everyone need a little help i have a new bl 15 loaded, enclosure 4 cb tuned to 32 hz, im trying to adjust my amp and head unit settings for this sub ive tried several things but i dont feel that its right... the amp is a hifonics bxi 2008d mono, and the head unit is a pioneer deh p7900... ok now ive played around with it a little and to get decent sound (bass) ive had to set this amp to gain level 3/4 up, and bass eq 3/4 up, subsonic a little over half way, and low pass a little over half way... and the head unit settings hpf 80hz, (sla) all way up, loud off, sub 1 normal, sub 2 to +6 and im guessing the band thats on this setting with this is the low pass at 100 hz, bass boost off, i have decent bass not any flex in a silverado ext cab. down firing box.. can anyone with a simular set up help on how to tune amp and head unit in? i also have yellow top batt. by amp... i know this bl 15 will do more and im scared that my settings are way out of wack and i dont want to play it much and damage it until i can get some help on settings... again thanks for your help...

anymore good suggestions for sub enclouser for a silverado ext. cab... thanks to all...

im willing to loose my back seat for this set up and on firing down how much clearence should i allow for... thanks...