Leon Tan

i used 8 gauge for my 2 BL 12's. works fine. tight but works well

i just recently got a hold of 2 XS batterys and i was planning to wire them up. but not sure if i would need a fuse inbetween the batterys, i also seen a few with busbars. would i need a fuse from the 2 batterys in the back to the main car battery in the front?

what's the power rating on the NS-1 ?

im making a box for 2 12 Fi BL 12's and was wondering do i need a baffle for the 12's? becuse if i baffled it would mess with the volume and tuning of the box? sooo? not sure. the port is located inbetween the 12's. anyones 2cents?

im using 3/4 MDF, i was thinking what shogen was suggesting. well the 12's are still new so im thinking about making single wall, then after the subs are broken in, slap on another baffle on the outside.

alright, well that answers my questions. well I AM A about to do the big three here n a bit, would i need a fuse inbetween the alternater and the postive battery? if so what size fuse?

i just recently got a hold of 2 XS batterys and i was planning to wire them up. but not sure if i would need a fuse inbetween the batterys, i also seen a few with busbars. would i need a fuse from the 2 batterys in the back to the main car battery in the front?

Jus make your own box buddy... not hard. at all. im buliding a 5 cube box tuned to 33 hz. for 2 bl's. jus cost me the board to make it haha. 32 bucks for a box

patriots 2012 superbowl winner

Dang. well i guess ill start saving up for the upgrade.

Does anyone have any idea when the SP4 12's will be released? im wanting to buy a pair. but there not up on the site yet. 2 SP4's with a DC 5k amp

I once ran a BL on 1700 watts daily. no probelm. juat have to set the gains and subsonic filter up right and have sufficient power so you wont clip

im needn helpon that to. i just got my bl 12's.. needing some help with the box

soon to be 2 bl on 2 1700 rms amps

i have a Bl on 1700 rms daily

how much would it be to make a box for 2 Fi BL's? 5 to 6 cubes? and shiped to 87420 zipcode?

seeing this post makes me want my new BL 12's right now. might post a pic of them after they come in. Fi

did you bulid the box?

Nice.

I need some 2 cents on my new setup which will be 2 Fi Bl 12's fully loaded. im going to have 2 1700 rms watt amps total 3400rms. i have a 125 amp alternater and a redtop battery. i was wanting to keep my stock alternater for low funds reasons. for now what can i use to power the subs? could more batterys work for now?

at the moment my buget is 250. i can grab a few small 850 batterys for about 250.4 of them 3400 total power. a high out put alternater is about 500$ from mechmen. which is money i dint have at the moment. would be nice to have one tho. but could 4 850 small batteries work for the time? or should i wait an just save for a h/o alternater?

I need some 2 cents on my new setup which will be 2 Fi Bl 12's fully loaded. im going to have 2 1700 rms watt amps total 3400rms. i have a 125 amp alternater and a redtop battery. i was wanting to keep my stock alternater for low funds reasons. for now what can i use to power the subs? could more batterys work for now?

check if the sub has dime size holes on the side of the sub. you can see a copper coil. if you hav the small holes you should hav full cooling

i was wondering would the Fi Bl 15 in a tuned box be louder in bass then two type r 10's? hmm and what is a good tuning for the Bl 15? 35hz? 32 hz? or 30hz? i was planed on hitting the low lows. were people can here me a block away.. thats why im goin with Fi

havent checked on this thread in a while. but i bought the Fi BL 15. its the best sub i ever bought... for now... im plaining to get another one... 2 bl 15's on a sundown 3000 watt amp or a hifonics 2011 colossus... i upgraded my electrical. 2 batteries. 1/0 wire. big three... i would say the Fi BL are one the same or a little less then the 2 12's.. FI AUDIO is beast