UNIT 6639

Dont buy that amp, from what I read RD is kind of a shady company. Please, do yourself a favor and spend your money elsewhere! You would be lucky if that amp put out 1000 watts, a stock BL will eat 1000 watts daily easy, I ran 1200 to 1500 to mine daily, it didnt have any upgrades to it at all, completly stock.

I hope you enjoy yourself sir

Hey guys, did the motor show up to you yet.

Payment sent for recones , please let me know when it shows.

Will do

Sorry Scott, tried to pm you but your box is full.

, thanks Scott , I am going to go ahead and prepay for everything Nick quoted me. I am all excited, I can't wait to get my subs built and installed !!!!

Motor shipped out today, conformation # is 0307 1790 0004 8094 6891 . Could someone let me know when you recieve it. Also, I sent Nick a pm about getting the gap cleaned out, I got metal shavings in it when 2 of the screws became stripped. I drilled the screws out, hence the metal shavings, 2 of the bolt holes have a little screw left in them, I hope this will not be a problem. I will mail a USPS money order on the Friday (12/07/07) for payment of the recone. Please get back to me either through a pm or email me at [email protected] . Thank you FI

Mailing my motor today right after work, will you guys be able to clean the gap out before reconing?

I posted these pics on other forums of the aftermath of me tearing down the sub before I ship it to FI. Figured i would post them up here as well.

http://i238.photobucket.com/albums/ff131/D...Konaki12001.jpg

http://i238.photobucket.com/albums/ff131/D...Konaki12002.jpg

http://i238.photobucket.com/albums/ff131/D...Konaki12003.jpg

oops.

http://i238.photobucket.com/albums/ff131/Decado2/Konaki12004.jpg"]undefined

Scott/Nick , when I drilled out the 2 bolts to get the basket off, I got metal shavings into the gap (Even though I taped it off) , will this be a problem?

7elephants.com

Well, I cut out the soft parts, that was the easy part, screws were a B to get out, 4 came out with a little bit of muscle applied, 2 stripped when said muscle was used. I drilled off the heads but the basket still wont come of, I am thinking I didnt drill deep enough the seperate the basket and motor, but, my drill went dead. So, I have to continue tommorow after work when the battery is fully charged. I am not looking forward to tearing down the 15" Konaki I have . I tried abusing it off 2500 watts this morning on the way in to work, it sucked up the power and didnt quit!

Scott/Nick , what is the turn around time going to be once you guys recieve the sub/motor?

Yup, Nick is the man, thank you so much Nick, and thanks for not getting upset with my constant nagging . I sent Nick another pm with a question. I asked if it would be possible for me to send in both my Konaki's and get the same discount or am I asking too much? I had a 15" on the way and it arrived yesterday so now I have a 12" Konaki and a 15" one. They are both brand new and are in 100% working order, I am wondering if I should tear them down to save myself the shipping cost or if you guys want me to send the sub in as is, I dont know, maybe you guys could have fun blowing them before reconing?? My worry is, will I be able to get the baskets off once I cut the soft parts out, I am sure I could get the motors into a flat rate box for shipping and save myself a buck, what do you guys think?

I dont think subs sut off, it must be your amp thats cutting off.

Ok, I figured as much, I hope you enjoyed your holiday Nick , thanks for responding.

Gobble Gobble

Hey Nick, let me know about that quote, I am ready to ship the Konaki when ever you let me know

I do not think anyone has shipped one off to Fi, I would be more than happy to ship mine to FI and let Scott have at it! But feel free to post the gap dims, I still think someone should send one to the shop, it makes sense, there will be alot of people looking for kits for them. Its no big deal for me to ship one of mine to Fi, I have a couple of other subs to run in the mean time! As soon as FI gets back to me witht the details I get to shipping it off to them!