SMpaintball78

in between cincinnati and hamilton

i hav all 4 gauge now but im switching to 0 in the near future haha

do u think 2 of those kinetic 180's would be enough?? Yes I do think they would be enough, but more is always better i think a 220 amp alt. with 2 kinetic 1800's should be more than enough to run 2500-3000 watts lol. i think

there asking 500 which is a tad over my max spending. even at 450, its a little much for me. and i wont be purchasing a amp for atleast another month if not longer. I highly suggest saving your money until you can buy something worthwhile. Remember, you get what you pay for. $400 for 3k is hard to find unless you come across a killer deal in the Classifieds. ya. thats where i got the x's from. there are some hella good deals on there. my buddy might get this kicker zx1000 in a trade deal and he said he would sell it to me for $130 and its the newest version out so if that happens, ill just find another one. the do like 1400 watts so i think that should be good for each solo x. it all depends on what goes on with his stuff.

do u think 2 of those kinetic 180's would be enough??

there asking 500 which is a tad over my max spending. even at 450, its a little much for me. and i wont be purchasing a amp for atleast another month if not longer.

ya. id LOVE to get a kicker zx2500.1 BUT there not stable at 1 ohm which really pisses me off lol. i have seen in multipul forums where people run them @1ohm and never had problems but id rather not take the chances of it blowing

well if i go with 1 big amp, it has to be 1 ohm stable, if i go with 2 seperate amps, they have to have max output at 2 ohms. my subs are dual 1's so each one seperatly can be wired at either .5 or 2 ohms......

ok heres another question. if u were in my shoes, had the power and around 450 max to spend on amps, what would you do amp wise??????? now dont say "well id sell the solo x's and get something else for starters." im not selling them so please dont suggest that. its not happeneing for atleast a few months after these are installed......

ya i found the 2500's for the $350 ranger. im kinda lost on what to do amp wise.......

thats the only bad one i can find. iv found multipul review on the smd forums, and there nothing but good reivews.

well my solo x's will be here monday, so id like to get started on box plans. my max dimensions are 50"wide,21"tall, and 15deep which if used all that with no port is 7.388 now i know once i add port, and displacment of the sub, it will go down. id like to get atleast 3.0cf for each sub.the more the better lol as for tuning, im not so sure. i like lows so i was thinking around 32Hz?? if anyone has a better suggestion, please let me know.im building 2 seperate boxes so when i sell them, they will be much easier to sell. the recommended ported box for 1 10 is 2.25-6.0cf. as for an amp, i am saving for a audiopipe 3000d (315 shipped w.warrenty) or if i can find a better amp used for around $350 ill buy that. i know that there are a few good deals going on right now with some amps on here but like i said, im saving and wont be able to purchase until at the earliest next month. let me know what you guys think!

2007 is not the only year Kicker Solo X's were made, here ya go: Dual 1 ohm X's thanks for clearing that up for me jay-cee

19.50x3 so 58.5????? the box is a total of 31" high and im using .75 mdf so 21-1.5 (.75x2) thats where i got 19.50 from for those wondering.

\dual 1's just a guess. and the other boxes i built at 32hz sounded good. i love the lowes;) haha Let's build something together? and hows that gonna work? haha

not sure how to calcualte it. i was going to do a 3" wide port that 17.67"'s long and that makes it tuned at 32hz. i cant go any bigger than 3"'s wide or i wont have enough room for the sub. it will be hitting the back port wall. even at 3"'s, it only leaves like a little over a inch between the back of the sub, and port wall.....

\dual 1's just a guess. and the other boxes i built at 32hz sounded good. i love the lowes;) haha

well i got the solo x's today. and damn these things look mean haha. ill post pics up tomorrow after work.

I think your right. The L7 isn't mine though. Also the mtx is in a 5cf box. 5 cf for both or a piece? lol . the mtx 9500 is a very durable subwoofer. i loved mine. if i had enough power to actually use them the right way, i would have kept them.

seems like a realllly small port, might wanna go with aero ports to save volume i was highly considering it, BUT i know absolutly nothing about aero ports. i dont know how to calculate how big they need to be or anything. thats y i chose slot port over aero.

i went from 2 15" l7's to 2 12" mtx 9500 12's in there recommended ported boxes on a kicker zx1500.1 and the mtx's i found were better all around. they had ALOT better sq and got damn loud. id take the mtx's

i got on the12volt.com and they have calculaters for ports with tuning, and sub box airspace. did u have to pay for WinISD? im not really sure what it is? id love to draw this up in 3D but im not very good with drafting lol.

well i have been doing some thinking and calculations, and i am highly considering just doing 1 big box for both where they would shard the same airspace with 1 big port. if i used all my max dimensions, i came up with 6.418CF before port displacement. but with 1 3"wide port, id have to have 17.67" of port length to achieve 32Hz. after port displacement, i would get 5.995 for the subs to share so roughly 2.97CF for each sub. kicker calls a minimum of 2.25 for 1 so this should work right? update. one more ?, my port wall #1 would be 9.50" deep and the subs mounting depth is 8 3/8 so is it ok to mount a sub that close to the back wall? theres a little more than 1 in between the back of the sub, and the back port wall

ya i LOVE lows lol

kicker calls for 2.25-6.0 lol for 1 10