SMpaintball78

haha. i cant wait to see how the design turns out.... p.s. i am going to make a new thread here shorty. i want to know the best way to make this box. like wood glue,sould i use screws or staples. that kind of stuff.. i need as much help as i can get! use Elmers wood glue the blue label.....Use Screws for sure not staples..... and I would say fiberglass resin all the corners and let cure over night! and TAKE YOUR TIME!!!!!!!!!!!!!!!! DO NOT RUSH!!!!!!!!!!!!!!! iv never fiberglassed in my life haha. or even seen it done Oh lord! I'll stop by on friday after work and show ya how! LOL lol this box may take me awhile guys. bare with me on this one.

haha. i cant wait to see how the design turns out.... p.s. i am going to make a new thread here shorty. i want to know the best way to make this box. like wood glue,sould i use screws or staples. that kind of stuff.. i need as much help as i can get! use Elmers wood glue the blue label.....Use Screws for sure not staples..... and I would say fiberglass resin all the corners and let cure over night! and TAKE YOUR TIME!!!!!!!!!!!!!!!! DO NOT RUSH!!!!!!!!!!!!!!! iv never fiberglassed in my life haha. or even seen it done

haha. i cant wait to see how the design turns out.... p.s. i am going to make a new thread here shorty. i want to know the best way to make this box. like wood glue,sould i use screws or staples. that kind of stuff.. i need as much help as i can get!

I'm glad, because I'm not trying to steer you away or put you down in any way. no your good. iv never built a box this big before so it will be quite an adventure for me.... haha

jay-C76: ya i just installed it. shes ready to go haha Stephan: you have a point. i see where your coming from...

Awfully elitist don't you think? Nobody EVER "does it right" on their first try. He's not dumb. Just eager and uneducated like we all started. true. i want to start the build for the solo x's this week. im going to get a sheet mdf tomorrow. and hopefully one sheet will do the whole job.

my failure???? and i meant jay-C76 Hell Lantz, my bad, I thought you weren't gonna do this box build. I'll send ya the design before the weekend. Get Google SketchUp (it's free) so you can view the design. side note- cut Lantz a little slack guys. He's new to the game (compared to most of us) and is trying to "bass on a budget". He may ask some questions that to us may seem dumb. He's trying to learn, (the hard way sometimes) but all in all at least he asks question instead of assuming. thanks jay-c. i appreciate it. iv only been in the whole audio game for just over 2 years now. its my favorite hobby haha

you have a point sir. i will download it tomorrow and give it all a whirle

i stopped by a local pawn shop and they have a kinetik 2400 for 150. they said i can take it to autozone and have them check it out before i give them the money. is this a good deal????? the outside looks flawless with very minimal scratches and dings

i know the guys who run the place so i was going to offer like my ipod or something untill i have it tested. just so they know i will come back to get it and pay them for the battery haha.

i went on the12volt.com and they have the calculators set up to find port length and box volume. does this winisd cost money or how does it work? iv never heard of it before

my failure???? and i meant jay-C76

ya. there was something wrong with the zr340 i was using when i showed my system to alanh and jay-cee. i hooked up the other one i had in place of the origional one i had and its about twice as loud as it was. for 1 10, its damn impressive

well i had the day off of work and class today and was boared as hell. so i decided to make a new face for the front of the box the IA was in which is around 3.5CF with a big ass 4" slot port.i also installed a little oldschool kicker zr240 amp (clamped 475watts) and ran it with a 2 ohm load. im VERY surprised. the sub itself doesnt really move all that much and it gets lowwwwwwww. the range of hz it was low and powerful id say was between 20 and 38hz. everything else was ok. anyways i thought id fill you guys in on whats been going on with the danger ranger. i didnt get the mustang back today either b/c i had to buy a new starter and the mechanic cant install it till tomorrow so in the mean time i hooked it up in the truck

i noticed that when i turn my system up (1 kicker oldschool zr240 and 1 solo x 10) that the amp will give the sub a good amout of power for about 10 seconds then will lose id say a quarter of the power it had and stay that way. could this be becasue my alternator is not giving the amp a steady voltage??? i have all stock electrical right now with 4 gauge wire and the big 3 done. what do you all think?

Umm, no you haven't. Not even close. This is true, there's no way to draw 135 amps from an alt that only makes 95 amps max. the amp was fused at 150 so either way you look at it, i was drawing more than the alternator was intended to......... that was the point i was trying to make here. i just picked up a new alternator from a 2005 f350. it mounts up perfect. the new alternator is 130 amp. better than my 95 amp lol

ya. shoot, id pay 30-40bux for another 35amps. that way, the new alternator i get will last me until i can afford a 220.

lol ok thanks. i wasnt sure if the switch would work. ill go to you pull and pay either today or tomorrow and find one off of a f350 and see how it goes. it will give me another 35ampers to play with so it wont be such a stress on everything. (going from 95amps to 130)

i just took the amp that is messed up back to the guy who had it fixed and hes going to look it over for me to see if anything is wrong

my volt meter wouldnt work so i used my buddies and hes not home. ill try check it again today. but i know at the battery, with truck on, subs blaring, i was getting 13.3 and that was the lowest it dropped. with just truck on at idel no subs, i was getting 14.0

im up in ohio. in the middle of the summer, it will get up to the high 90's. which even if u roll my windows down, its still hot as fuck. but like right now, its like 75 outside which is perfect haha.

shit with just my a/c on my volt meter on the dash drops hella haha. i VERY rarley use my a/c though. like this summer i used it maybe 3 times. saves gas in my opinion.

yes i believe so. here is a picture of my alternator..... here is a picture of a 2005 f350 alternator...

i had the truck running, turned it up to what i normally listen to music at when im bumping and closed the door. had the hood popped and i stood there for a good 15 seconds and it never dropped below 13.3 13.3 at full listening volume is fine. only thing i didnt check becasue i forgot was when i bump with my headlights on, my dash lights seem to dim a good amout more with them on. they are hid's

ya. im surprised my alternator still works at all lol. iv been drawing 135-150 amp from it for the past year and a half and it still puts out a damn good voltage. its a little stock 95amp from 1995 haha. i noticed my buddies 2005 f350 had the same bolt pattern as mine so would it fit? id love to just go get a used alternator off a f350. there 130 amp. compaired to my 95 amp, it would help a lot until i get the cash for a HO