sundownz

Yes, received.

I'll have pricing once the parts get here and I break out import costs and whatnot. Also need to do final checks on the coils to make sure both the D2 and D4 fit -- if not I'll have specialized E8 v.1 coils made and simply use the E8 v.2 parts besides the coil.

Okay guys -- Team is full for 2010. Please do not email me about Team inquiries until 2011 -- this means not until January! Our Team is strong this year and I cannot handle the 100+ Team inquiries a week any more this year. Any Team or "sponsorship" inquiry e-mails will be deleted. Sorry for the inconvenience but my Inbox gets 100+ e-mails reading "sponsorship" every week.

There is a relay inside that de-couples the output.

Right... it is literally the same geometry as an SA motor... same top plate, back plate, magnet, and coil height so linear stroke is identical... just a wider magnet, an added shorting ring, and a 3" coil (of course spider has to be bigger and whatnot to support that).

Once I figure out what it is *laughs* Was thinking about finally bringing out an "X" line -- I worked on some prototypes several years back under the X12 name.

It performs pretty much right on par with the SA line except with higher power handling... so imagine the SA series with how tough they are but with a 3" coil

Yep. I don't have an ETA yet... but I've designed the motor and tested it. It is essentially a 3" coil version of the SA motor with a wider magnet and a shorting ring.

Our 1000-watt line will have 18s, though.

No plans for that.

The actual DCR per coil is 3.5 ohms -- so each sub is 1.75 divided by six you have 0.29 ohms DCR. A higher reading on a DMM is from the lead resistance of the meter itself. As for the amp going out -- could simply be a fluke event -- Chris can tell you what happened.

If it's been a while (over a week) and you haven't gotten a reply it would be fine to re-send your message... this will get it fresh on my list!

List updated.

Yep... except SA-10 D2 which are temporarily sold out.

Originally posted on my SMD Forum by "mbrooky" ONE sa-10 on music 30sec avg - SMD Forum ---------- pulled a thorshammer with my sub..lol 6k on one 10 softparts came apart on my sub when doing a run so my good bud tony let me throw in ONE of his sa-10s to see what it would do on my setup for sng's was taking it easy on it as it was not my sub...lol score kept climbing but ran out of time and didn't want to kill it either lol and my boy tony's s10 with 8 sa-10s:

Yes, would be 2 ohm rating x 2

Good stuff They are very tough subwoofers, especially for the price / rating!

Runs on 240v AC -- supplying 260 amps continuous current set to 14.8v Hooked up to some Stinger SPV-70s... need to get one more in there. Should do quite well... this replaces our prior setup of three Pyramid 40-amp units (only one recently as we blew up the other two). We went through those on a regular basis... this should be more reliable and much more power than we had before.

Nice!

On music on a 3500D @ 1 ohm we didn't drop under 14.1 volts -- not bad at all !

lol what? Sundown SA-8/SA-12 Magnet Boots - SSA Car Audio Forum

I'll be holding onto this one I've had it for almost 10 years... it's a bit of a Frankenstein inside from being repaired / modded of the years -- which is why all the others blew and it didn't *laughs* You have been doing stuff in car audio since you were a teenager? Thats crazy! Yep ! Brandon sold me my first system when I was 17

13.5V DC 25.8A 350W Regulated Switching Power Supply - eBay (item 390221420443 end time Aug-24-10 03:21:01 PDT)

4 and 9/16" mounting depth... almost forgot.

I'll be holding onto this one I've had it for almost 10 years... it's a bit of a Frankenstein inside from being repaired / modded of the years -- which is why all the others blew and it didn't *laughs*