sundownz

Dropped some Z v.2 in there with 1 spider each... 153.5 dB on 2770 watts on my clamp. Now... to see how that scales up with more power

63.1 mm on the D2 and 63.5mm on the D4 coil

They sucked... bad. Of course those had three spiders - stock - and this box is very small - so it resulting in a very low efficiency. I dropped four Z v.2 12s in yesterday with one spider each... going to see what that does later.

We sent them to New York for some testing.

Glad they are doing well for you !

They are a new dealer through our rep up in that area -- haven't been added to the site yet.

Yes, I stock parts for all of our woofers including these.

About how long does it take to get it all done and sent back to me sir, rough estimate is fine? Once it gets here probably 5-7 days -- could also be less if we aren't extremely busy.

I do not really suggest going too big on the box... it is all about your expectations -- while they are awesome woofers an 8" sub only displaces so much air.

On your 1500D the stock options will be best -- 12" re-cone is $100

Probably... was able to do 152s on a burp with two 1500s on my setup with the longer ports. So a 3000D @ 0.5 should produce over a 150 on music. I don't know if I'll be going to any shows this weekend yet.

Team Sundown member Walt from South Carolina. 4x Stock SA-12 D4s 2x SAZ-4500Ds I do not suggest doing this to your SA-12s but Walt has been doing it for a while Video of perfect run :

Originally posted by Skip01 on my CACO forum : http://www.caraudioclassifieds.org/forum/showthread.php?t=53777 Therefore... I don't want to hear any "because it's a CRX" comments as this is a big ol' SUV ---------- SA-12 2 SAZ2500s @ 1ohm strapped 2.2cu @ 40hz 148.5 legal @ 46hz 150.4 sealed Kick @ 46hz Bout it.....Thanks Jacob Funny story...ever since i seen Jacob doing nuts scores with 1 15s and so on, than a few guys doing 1 SA12...i wanted too put my name in there....eventually got around too it. Emailed Jacob: "So what sub would u like me too put up a sick score with..z2 12 or SA12" "SA as i sell 10x more of them too Z2" And there we have it

... do not call from a blocked number or name, your call will not be answered. Sales people love calling us so we do not answer these calls. Also... MUCH more effective than leaving a phone message would be to e-mail me if you can't reach us by phone on the first try. We don't publish the number on our site since it is NOT the best way to reach us... often times we cannot get to the phone.

I am going to bump this up... phone call volume is up probably 1000% in the last 2 months and we honestly cannot answer it most of the time. We are VERY busy and don't have a dedicated person whose job is just to answer phones. If you cannot reach ME via email then try Brandon -- [email protected] This way you won't be waiting on me for a long time if I'm backed up.

The SA line is mostly sold out right now... we only have SA-10 D4 in our warehouse at this time. We have more SA-8s both ways and SA-10 D2 due in 3-4 weeks. We have all other SA sizes and configurations in large quantity due in November. ----- Our distributor in Iowa, Top Dog Audio, has some SA woofers in stock. WoofersEtc.com also has stock on most configurations of the SA line right now as well.

Originally posted by Greg Kashin on my CACO Forum : http://www.caraudioclassifieds.org/forum/showthread.php?t=54443 ----- Sundown Audio z18 v.2 - the first and only z18 so far in the land that gave birth to the great Borat powered by a dd m3 @0.5

This setup does keep gaining with power... with the full length ports (which are 1.8 down at this power level) I have done a 154.7 before with this same setup running two 3500Ds @ 0.25 each. I plan to try more power after the show... and eventually to try four Z v.2 12s with single spiders. I tried some Nightshades a while back with 3 spiders and it was actually quieter than the SA-12s -- so I think this box needs a much softer compliance.

Sounds good on paper

You still can as a pre-order for the next run -- still @ the sale price.

SAZ-3500Ds SOLD OUT -- the special will remain as a PRE-ORDER as we have more coming with all the new amps. Really amazing how fast those went... I am very surprised.

Per original post : "ETA is roughly the end of November for these to arrive." I typically end pre-orders shortly before they arrive.

This ring is made from plastic so has no effect on impedance -- it is purely a spacer and cooling ring on the SA line. Since the NS v.1 has open vents in the frame it will likely have no effect beyond looking cool.

Tooling is finally done ! * Logo embossed in the ring. The frames will have the drilled holes sealed up and all the under frame air flow will go through this ring -- brings it in right at the coil. These will show up in production toward the end of the year.

The bolt pattern is slightly different so I can't do it - sorry! If you wanted to get a pair and machine in a matching bolt pattern I could do it, though... the rings themselves are pretty inexpensive -- just the tooling cost good money.