sundownz

The X-12 will be around $285 MAP or so -- similar progression in pricing difference per size as the SA line as well.

You can use white paper until it's snug... probably about 12 sheets of typical printer paper.

10s will be the last size to come out -- they are the lowest seller.

I have some plans for larger diameter coils but they are far enough off that it's not worth bringing up just yet.

Makes perfect sense to me

Technically you can find light duty subs with huge diameter coils if you look around -- but they also typically have a short winding height like the new Alpine Shallow Type-R : http://www.alpine-usa.com/product/view/swr-t12 -- 4 inch coil Or the JL Audio Shallow : http://mobile.jlaudio.com/products_subs_pages.php?page_id=245 -- 7 inch coil IMO -- if the new 4" coil BL has a WW and cooling setup anything like the current model it will be legitimately much more than a 1kw driver... likely would out-perform the older BTLs thermally for that matter. I can only imagine if they still rate it for 1kw that is simply to be very conservative ----- In any event -- in our case -- we are still working on the soft parts for a 4" coil... have had a spider drawn up for some time but other projects have been priority.

Thanks! I am also very happy to be where we are in this economy and I am thankful every day to the customers, dealers, and distributors that helped us get here and help us continue to expand.

That is a long term goal of ours as you know It will take alot to support buying the machinery but I think within the next few years we may be able to start doing some of those things.

Thanks! I too am very impressed with how well things have gone... I guess hard work does pay off and doing your best for customers doesn't go unrewarded !

I am adding a phone / paperwork person early next year. I will also need a dedicated shipping guy at some point... as I personally pack and ship nearly every box that goes out of Sundown still as I am VERY picky about how things are packed, taped, etc. I was a shipping warehouse guy before I started up Sundown

I'm not sure why but they all do seem to have big holes in the insulation *laughs* The company in this building before us sold leather and I bought a huge piece of crocodile leather for my Jeep's head-liner (seriously... mainly to be funny).

This spider isn't one of the regressive units I've shown you but is indeed very nice -- very much like what I'm using on the Z v.3

For a 1000-watt sub a 4" coil is bit time over-kill for one. Secondly, as was mentioned, I wouldn't have room for a good spider as we are on the 7" landing. Third, as was also mentioned, the coil would be VERY heavy as we are using copper windings. --- As an "in general" why we don't have a 4" coil driver yet -- the simple answer is I'm still working on soft parts for that. Don't worry... things are in the works.

Thanks Jon -- it has been alot of work to get here but I'm really glad to be doing what I'm doing ! Nothing that I love more than continually improving products and helping customers whenever I can

Thanks all

Few sneak peaks of the new place -- not a "new" building but new to us and MUCH bigger than what we have now. Will hold all the new products that we are planning to introduce and more of what we currently offer Our place now has been great for the last few years but we simply cannot fit everything in it any longer! We'll be starting construction on our office / work area shortly in the far back right hand corner pretty soon as well.

I am extending the pre-order for a little while longer in case anyone wanted to get in on it but wasn't able to before the end of November. I will run this until I get notification that the amps are on the final truck on their way to our warehouse. We expect the amps within 2 weeks or so based on the latest information -- updates will be posted as they come in.

Yes it will -- the same boxes should work perfectly.

I am expecting 1 or 2 sizes by early summer. Damn you jacob! i need two 18's before Feb 1'st lol Sorry -- working as fast as I can !

Yes, these use a 3" coil

If you need subs now get the SAs and sell them when these are ready -- I won't have my final samples until ~February so these are a ~May item.

We have the SA @ 600 and the Z v.2 @ 1500 now So the X fits right in between the SA and Z series. The SA to Z gap was a bit too wide

The gain on the master amp is a little over half way up, and with the gain knob it's a little below half way up. You think thats too high? I'm going to call you ina second. This varies based on the source voltage -- I would just slowly turn it down until the amp stops going into protect

Most likely you just need to turn the gain down a bit -- you can get them to protect just by having that too high even at 1 ohm.

Working on it as fast as I can -- but all the custom tooled parts are going to make it take alot longer to produce.