sundownz

What kind of power at 8 ohm bridged would the IDQ get? ~200 watts or so.

Can you run the component set to one set of channels @ 2 ohms and then the woofer at 8 ohms on the other set bridged ?

This is what I did to the floor in the back : This is what I found when I pulled up the rear carpet (WOW): --- My Jeep came right off of a farm when I got it... when I burp it a bunch of "dirt" always falls off. Well, I inspected some of this dirt in my shop and it is actually rusted metal flakes mixed with old mud *laughs* So... lets hope the Jeep lasts long enough to reach my SPL goals :) I was not able to meter the gain here as I had the entire system out re-working the amplifier rack for my new enclosure and new buss bars - you can see the new buss bars here : http://www.caraudio.com/forum/showthread.php?t=401848

* I have just a little bit of aluminum here. * Front brackets to hold them in place will be aluminum angle just like the bars. * Allen bolts + lock washer + brass washer (have one on both sides) * This is where the wires will connect for the amps, grounds, flux caps, etc

* Wires installed onto bars * Taped over the ends of the + bar near the chassis * Flux Caps and SAX-50.4 on bottom amp rack * Only the "-" bar is exposed

Same as the first post - ETA is May 11th to May 20th.

Trade-in program is becoming a hassle again so I am shutting it down. Thanks all

Okay guys. I have decided that the program was too successful to cancel over one sour deal. So... it is back. This is what it is all about for those that do not know: * You contact me with what you have that you want to trade-in * I look up average re-sale value and send you an offer * You can choose to take my offer OR NOT but I am not going to haggle, my offer is what it is * If you choose to accept the offer you confirm with me then I add you to the trade-in list * You ship your amp(s) in so we can test them * You can either send money with the trade or we can contact you after testing for the balance via Paypal * Once the balance is paid, if there is one, we ship your BRAND NEW Sundown amp out to you WE DO NOT accept woofers or speakers in trade - ONLY amplifiers. Used amplifiers for re-sale DO NOT CARRY ANY WARRANTY BEYOND A NO-DOA GUARANTEE. I want this to be VERY clear. We test the used amps we get from trade but can not predict longevity. The used amps we RE-SELL from trades will work WHEN YOU GET THEM but there is no further guarantee on them. DO NOT PM ME ABOUT TRADING : E-Mail me at [email protected] DO NOT PM ME!

Sounds quite reasonable with shipping.

Do you mean "CE" -- we have that certification for the SAZ / SAX amp lines. You have a distributor in the UK - he can help you with a pre-order : Direct ICE Contact: David Wilkins + 44 1908 30927 [email protected]

Yep!

USA or if you do not have a distributor in your country - shipping would, of course, be extra.

Amp rack will cover the batteries so there will be very little chance of short once everything is assembled.

If you use channels 3+4 and enable the LPF for a subwoofer that is what it controls.

It has 3x 30 amp fuses.

E marked ? What do you mean ?

Nice

Back for testing. The motor force is lower than we anticipated so this prototype may end up as the Nightshade v.2 next year The motor force is dead on for that. Made some changes to reduce moving mass compared to the Nightshade - so SPL should be improved along with power handling.

I have FOUR SAX-100.4D (latest model) used here for sale. Pictures to come soon. $325 each / 1-year warranty.

NICE

What he said

Same knob.

830 cm^2

Z15s are in stock in D2 and D4.

The 3500D is our new model to replace the 3000D entirely. The 3500D will be continued in production but NOT at the low pre-order price.