sundownz

Nothing available at this time... un pinning for a while.

I have six used SAZ-3000Ds available at this time : Good Condition New Casing -- Used Amplifiers * $675 each with 1-year warranty

4x Used SAZ-3000D Available ! All in great shape -- all come w/ 1-year warranty. They all come in original box w/ remote. $625 each shipped in continental USA.

There are a limited number... if interested e-mail me.

These subs will be built with used or blemished motors (cosmetic issues only). They do not look horrible but they do not meet my spec for cosmetics. 12s and 15s only at this time ! 15s -- $320 12s -- $305 SHIPPED in Continental USA. At the blow-out price we will be offering simply a no-DOA guarantee (they will be guaranteed to work when you receive them and no more). I do not have very many... so act quickly if you want them. These will have the newest aluminum pole plugs + the new steel spider bolt down rings. They will use a silver 12-spoke frame. * Steel spider bolt down ring. * Silver 12-spoke * Blemished back plate * Another photo

Nothing is *laughs* He will be running three of the four existing "Monster" prototypes... closest thing to Brandon proof we have found.

The 3500D is incorrect - the other amps are correct. Need to get up w/ Mark about fixing the site... the 3500 has the 3000 length listed.

Z v.2 will be available in 12, 15, and 18 sizes. I may also offer 10" size.

We are sold out of new motors -- so no longer available. I did not understand. if I want to order them, are no longer available? until mid-2010 there will be only the Z15 v2 and SA series?? You are correct. Nightshade v.1 is no longer available.

Let me break this down -- it probably will take a 3k amp just fine when wired at rated impedance, but you won't need to. I AM using a coil with almost half the mass of the Nightshade v.1 model so there is less thermal dissipating mass (although, cooling is better on Z v.2)... but this is the thing -- the Z v.2 production model should be about 1 dB more efficient at equal power compared to the v.1 Nightshade. So... if you needed 3000 watts to do X amount of SPL on the v.1 Nightshade then you will need only 2250 or less for the same output on the Z v.2 (likely less as gaining 1 dB at that point takes more than the 33% needed in theory). So... the top priority in designing the Z v.2 is more SPL per watt, not necessarily to soak up alot of power for no reason If you want to dump a bunch of power on something daily then the Nightshade v.2 is probably more for you as it is getting a very large voice coil with substantially more mass.

We are sold out of new motors -- so no longer available.

Not exactly... but it is based on alot of what I learned from that prototype.

Yep. Even if we run out TeamPSI is always there

I was almost right on applied power Clamped 7200 watts @ 154.3 dB at the competition yesterday.

Had a few requests for videos. Made one playing "Trap or Die" by Jeezy. Seemed to be about the same on the meter door open or closed. Link to video : Four of the new SA-12s being used on two 3500Ds @ 1 ohm each (turned down of course as these are 600-watt rated subs).

I built one up (prototype motor still) for a show tomorrow... D1 with just two of the new spiders + double leads. Burped two 3500s @ 1/4 each on it resulting in 154.2 dB -- with my voltage drop / impedance rise that is probably around 7kw... I may get time to clamp @ the show tomorrow.

We still have some for you Gary.

On the SPL testing... that was in my Jeep, no wall, sealed on the dash, at 53 hz. I forgot to mention that.

I am shooting for ~1 dB gain vs. the SPL results I tested at equal power with the Z v.2 -- I think that with my final improvements it is possible.

These are almost gone so I am unsticking the topic.

I am behind... just saw this. Do you want to OD with or without gasket ?

Got it cut yesterday !

Haha - yah, re-cones are not bad.

Leaving today after UPS picks up... will not be doing much e-mail while I'm gone, just a heads up

Hmmm...