sundownz

In the low 300s.

My May-June estimate is very conservative... I have a few other parts I want to get in line first -- voice coils, soft parts, etc. It is indeed still 9" slugs... otherwise the motor is different in every measurement except the OD of the pole compared to the NS v.1

Possibly... re-send them.

I am sure they would do pretty well... they will work sealed too, but ported is much better.

#3 and #7 still available.

Still have some of these !!!

Very few.

Z v.2 -- ETA January SA-8 -- ETA February SA-10 / 15 -- ETA March-April NS v.2 -- ETA May-June The only new amplifier on schedule right now is the SAZ-4500D... first run sold out, second run perhaps March. It would be sooner but we have 3 weeks of delays from upcoming Chinese New Year + CES.

x2 -- I was expecting them to be here right around now.

Welcome to the forum

Yep.

Thanks

I use basic Scosche RCAs usually.

Got a little news... the capacitors are still holding us up. The amps are basically done otherwise waiting for them... expected completion date is December 15th on the amps then they will be sent to me. Looking into faster shipping options on the pre-ordered amps if possible.

The plugs on many high-end RCA cables do not play nicely with the RCA connectors on the SAZ Class-D amps -- and sometimes they are so tight that they will pull the shields off the SAX amp plugs.

Sundown will be closed Thursday and Friday... seriously Going to visit family for the Holiday.

Had a good visit I'm home now working on the new house a bit before getting back to work.

As always... I will post as soon as I have any new information.

It is sporadic... but I do have more that aren't listed yet.

Gotcha... those should ship out Monday when I'm back from Thanksgiving.

I do not think I received a Paypal today for a used 1500d ?

Got some word yesterday... expected to arrive on the east coast within a week or so. Then I should have them shortly afterward. Unfortunately one of our longest pre-order delays to date... but it is always a possibility when dealing with shipping from overseas. As I stated in the original post "DO NOT pre-order if you are in a rush or on a dead-line -- as always there can be delays with pre-orders."

I don't necessarily try to make all the lines identical or themed -- I do what works best for the range I'm shooting for. So yes, it does look alot different.

Glad you guys like it so far It is a 6" diameter motor, very large for an entry level driver (our SA-10,12, and 15 use a full 7" motor!). 10" uses a 7" spider and the 12/15" use an 8" spider -- so they are not stripped down drivers in any way.

Send it to dB-R along with your original purchase invoice along with a note describing the problem and stating it is for warranty repair.