ChevyBoy95

been waiting on this for a few days. when the zcons getting in again?

cvt

I have been thinking about upgrading my doors and maybe finding somewhere to put a second set. any input on these? http://www.soundsolutionsaudio.com/store/products/Bravox-Audio-CX50CF-Coaxial-Speakers.html (somewhere undetermined) and http://www.soundsolutionsaudio.com/store/products/Bravox-Audio-CX60CF-Coaxial-Speakers.html (stock door location)

even with tons of vibration you just need some absorption of that vibration when it comes to amps(i guess kinda like having shoes with no insole and then putting gel insoles in, its better for your joints). like how you see people use rubber feet, i use .25in foam between the board my amps are on and the enclosure, the screws that hold the amp board/rack to the enclosure are drilled out bigger than the screw so the board can very very slightly move and absorb, any vibrations. What i would do is take the amp off the box all together. OP, did you look at the internals after they pooped?

For two they recommend .4 - 6 cubes sealed. I had the CVTs from 2 years ago and I thought they were great, i think you need a bigger box. As far as ported, never tried it.

ohh almost forgot this, i bought 2 sa8s from Steve, both in great condition and just had been reconed. Great guy to deal with. 10/10.

you have an 18 in 7.3cubes PORTED, but you say you have to seal the 15s? basically any 15 works in 3-5 cubes each. So why would 7.3 cubes not be enough? you could basically redo the baffle and mount them in the same box. edit: not to be a dick, but almost every idea given you seem to immediately throw it out the window.

Fi Q 12, in a nice ported box would sound amazing.

i love this post.

http://www.youtube.com/watch?v=zNHdd9Dwn2Q

hah, got you on the other board. I check all the forums im on at the same time (5 tabs) so if you post on this or the other i will see it soon enough. off to bed though, have class in 6 hours, damn forums keep me up.

way underpowered it seems, but it needs to be broken in, still stiff. here ya go. skip to 2 minute for bass, the first bit is me talking and or intro. new link, the other had info i didnt catch.

that thing is loud just sitting there, PUT IT ON SOME POWA! edit: forgot to mention, when i saw the thickness of that coil, my jaw literally dropped, shit is insane.

i really want to try a N2 18.

get audacity, it is free, it has a setting when you open a song in it, it will show clipping. example...

of what..? i pretty sure you mean the alt, but... ill just list everything Amps x2 Audioque 1200Ds strapped at 2ohms x1 Oxygen Audio Spiral F150 all 4 channels at 4 ohms Speakers x1 Pair of Kicker KS60.2s x1 Pair of Soundstream TWS.3 Tweeters Sub x1 DC Audio Level 5 18 Batterys x1 Interstate (stock location) x1 Kinetik HC800 (back) Alternator CS130 Stock 105 amp alt Mechman 200amp (125idle) will replace it (hell maybe a dual bracket for the stock and H/O later on) I think the case is a AD244 Large Case iirc Wiring/Install Wires +50ft of Knu 1/0 (2 pos, 2 negs) 10ft of Knu Karma SS (8ga) +100ft of generic speaker wire(not super cheap though) Kicker RCAs +20ft of Random(Knu and such) 4ga

does the same thing to my subs(my lvl4 15s and my 5)(my lv5 18 is in 5.7cubes with 16.5sqin of port at 36.5hz), could be clipping, i can play any song as hard as i want and no heat, i play it for 1 minute, and the dustcap is hot to the touch. I stray from that song now (bass boosted versions unless it is decaf) edit: the farther from tuning you get, the less cone control you have. So when you are tuned to 42hz playing a 28hz note, you first getting a lot of excursion lessening the amount of coil in the gap (reducing BL iirc) and therefore losing cone control which can cause more excursion, but as far as the heat, i think it is the song or something clipping cause rapid heating.

First one was me being bored. Second one is like 10min long... lol, at 8 min is the test tones (25hz, 28hz, 30hz) and right after is the crash (aftermath) http://www.youtube.com/watch?v=ZszfpYECNJQ

Awesome video throw a 3k at it!!!! thats what i will end up doing. probably a scendo 3500 at .5 or i may get it reconed to dual 2 so i can run it a 1. But if i do .5 ill watch the gain. Its awesome though, 2400rms to the sub, and 320rms to my doors and all i have is a stock alt with a kinetik HC800 and the most drop i have seen is down to 12.9v at idle. I dont drop .2v when driving. (gain is still backed down a hair until my DD1 comes.)

lv5 18

this is the first i have heard of it. link? here damn 22 minutes away, i hope i can go. not 100% though. Well good luck, ill be there in my truck if im there ill look for you, i would love to hear what SA8s can do.

this is the first i have heard of it. link? here damn 22 minutes away, i hope i can go. not 100% though.

this is the first i have heard of it. link?