mrogowski

Yes! Make sure you hang it on your bedroom wall with pride so you can look at it every night before you go to bed.

Act now, and you will receive a Letter of Authenticity certifying that your subs will get Funky Pup Loud at no extra cost!!!11!!one!

Much more than any human can handle** ** 5.7" on the inside lip.

Each with a bucket of KFC!

Do you not know the power behind the Funky Pup?! *GASP*

They would no longer be authentic if you do that.

Help spread the word guys!

I have 12" baskets if you need them.

Ha! I have a 50 cent lift kit for you, use a couple of nuts or an aluminum pipe over your mounting bolts.

I don't think you can fit an IXL in that box due to the angle. It would be tight enough at the fat end, but the short end kills the idea. I think I have a couple of MAW-10's left that should fit the bill for you tho. PM me if you're interested.

Not much more to say here. Keep it at 0.8 cubes and add your port. Keep in mind that lowering the tuning will add a fair bit of vent length so it may or may not cause a problem with your available area. Use one inch space behind the driver for the vent. Post up your maximum dimensions you can go so folks her can help you bang out a box size

As above. There's nothing wrong with having a bit of headroom.

Nice build so far. What is it tuned to?

Not much to report but Dave decided to repaint his pieces. He mentioned that he thought the first paint job went on too thin. So here are the shots on that:

Indeed. I would hazard to guess anyone purchasing an amplifier that size would be using it strictly for competing. Certainly it could be used for general use just like any other amplifier, but I have severe doubts any (sane?) person would be driving around with the volume cranked to 10. EDIT: I think they were just showing what it could do with 12v - certainly not something you would want to do for any real length of time.

That's a cool looking build. Very creative...

You need not wait long for that answer. This stuff is not new - it has been sold in Brazil for quite some time before coming here. Now, if you really want to throw numbers around about wire, simply using Ohm's Law like the bcae1.com does to determine maximum current through wire sizes is erroneous at best. Include things like thermal mass of the wire, dissipation factor, convection, thermal properties of the protective shielding and transmission factor - only then can you come to such a conclusion. But I digress...

Ok, no pee matches here guys. Thanks... Take a step back and wait. Please... This isn't ca.com Hahaha!

No worries guys. Just thought I'd throw the thread into the fray. Those who know about the amp understand. Those who don't just hang in there and we will show you some results

It's actually the other way around. Stetsom made the jump into North America before SD did. Nothing more.

I hear you all the way man. I too was very skeptical at what these things could do. Ha, this almost sounds like one of those really dumb half hour tv commercials where they try to sell you on a crappy mattress. Well, please hang in there as we hope to have some numbers up about the output soon. Best, Mark

Made in Brazil. They rate their output at 12.6 volts, so you will get 5k at that voltage. I posted the 14.4v measurement for an apple-to-apple comparison to what we see here.

Big Dave is the man! I hope you stick around to share a few more tips you've learned.

Hurry!

As above...