sgreer5

Thanks guys. As far as "coil rub", I just push the sub up and down as if it is being played and hear for any rubbing noise?

Hi guys, Im not quite sure if I put this in the correct section but Im sorry if its not right. Anyways I found I really good deal on a W7 on Craigslist close to my house. I was going to call the guy and make a time to check out the sub. Im pretty dumb when it comes to knowing what signs of abuse are for subs but I was wanting to know in general what are some things I WANT to see as well as some things I DONT want to see (as far as whether I should buy the sub). I mean I know that holes in the subs surround or any cracks are bad but as far as the mechanics of the sub what are some signs of abuse. Hope this makes sense.

I am building an enclosure for my 12 xcon and this is the first enclosure iv ever built so please let me know if i am doing anything wrong. I had my 3/4 mdf cut and i was going to use wood glue and wood screws. when i went to put in the screws into the vertical pieces of wood, the wood split. I tryd every screw i could think of any i couldnt figure anything out.. also how do you screw into the wood after you have just put wood glue on. the wood just slips around when you try to screw?

This is a simple drawing of my idea This is the same sketch but it shows my idea for where ill have carpet I know this is very amature, but its the best I could do.

Iv drawn a simple sketch of my idea on work but i cant figure out how to get it on here?

the carpet does come out in one piece for my celica. but do you raise the floor like 2"s or what? I believe the saz1500d is over 2" in height, so that wouldn't work for ya now would it The more space between the amps and false floor, the more heat dissipation and cooling. Im thinking of rasing the floor about 4 inches. As far as integrating a sealed enclosure with the floor? Do I just set the box on top of the false floor or do you guys have anymore ideas? You could always build the encloser to fit your trunk space. As in, you could build the box to fit the part under the carpet, have the sub firing towards the roof, then to finish it, put a false floor around the sub. Make it look nice and maybe even sparkle lol? Does firing it up not make it sound different? But I like that idea. If my elclosure will fit in the spare tire place i can build it from there and that way with the depth of the spare tire well and the 4" of the false floor, the top of the sub box might not stick up much higher than the top of the false floor? Idk if thats what your saying but I hope that makes since?

For heat dissipation and cooling = What you could do, but which would take a bit of work. Put in the false floor and amp rack. Carpet over all of it make it look "pretty." Then get small squares of 2x4's and screw them in to where your amp would normally screw in to the amp rack. So this way, you are actually raising up the amp and putting more space between the amp rack and the amp itself. I hope that's not too confusing... So what your saying is do not mount the amp straight onto a piece of wood? Basiclly give the amp space on the top (the cutout in the floor) and the bottom (the small squares that are attached to the bottom floor)

the carpet does come out in one piece for my celica. but do you raise the floor like 2"s or what? I believe the saz1500d is over 2" in height, so that wouldn't work for ya now would it The more space between the amps and false floor, the more heat dissipation and cooling. Im thinking of rasing the floor about 4 inches. As far as integrating a sealed enclosure with the floor? Do I just set the box on top of the false floor or do you guys have anymore ideas?

I think carpet it? And I want to protect my amps with fiberglass or something like that but they cant stay cool like that. Unless I do cooling fans. Which is way out of my league in fabricating

X2. That's how almost everyone does it To reduce weigh/costs, would 5/8" or 1/2" MDF work?

I am getting ready to build a nice simple sealed enclosure for my 12" Xcon. While im building this, I would like to go ahead and build an amp rack. I want something fairly simple. A false floor with the amps mounted down in the floor would look nice IMO but I need help as to how to start or what to do? this rack is for my 2000 Celica and the two amps are a Kicker 10ZX350.4 and a SAZ-1500. Pics or videos or just advice would be great!

Im looking for a nice 1.7-1.5 cu ft sealed box for my 12" Xcon. It willl be powered by my SAZ-1500d. Any ideas for some nice sealed boxes on the internet?

Would like to get a quote for a carpeted, flush mounted, sealed enclosure. I have plenty of room but my max demensions to work with in my 2000 Celica is 23" Deep 15" Tall 42" Wide. Would like this enclosure to be around 1.3-1.5 cu. AFTER sub displacement

Any suggestions for nice sealed enclosures.. Would really like to go prefab since this is sealed. But I want a nice prefab. Cant really find much besides ebay..