chrishova

It gets worse!

I was in my rig on the Norfolk Naval Base (yes the big one), didn't feel anything in my rig, but just saw EVERYBODY evacuating every building, THAT WAS SCARY!

youtube More pics coming...

audioanonymous He also did my dual inputs for the amp, so I got 2 runs of each coming from the front batt, through the 3100, to the amp. Tell him Chris sent yaz! He has alot of stuff already made up, the distro blocks are BA-60's ! BADAZZ!

http://www.youtube.com/user/ovnorfolkva?feature=mhee It's in, the SMD is BRAND NEW so it's really stiff! Not as loud as I thought so I got in touch w/ Nick and he said it will take a little while to loosen up! It is gettin louder by the day! I still will be gettin another SAZ3500D after I do some touching up on this build. Log coming soon

As always good read! You da man Nick!!! My SMD is getting louder by the day!!!

Viper 5902, mad sensors, 2 way paging, optinal silent alarm, so nobody hears the alarm go off but you, casaualy get up, cock the .40's and walk up on them... Or good full coverage insurance if you want to upgrade your system...

I'm loving mine!!! My voltmeter gets to the low 13's.... Still have the rebuilt alt. without the volt booster!

Exactly

How effective is it on slim jims, dent pullers that pull out the lock, etc?

I am, I bought it new, cause all the used ones I saw for $500-600, the shipping evens out to about a new one! I live KINDA close to Nick from Fi/AA and he met me more than halfway! GREAT DUDE! Even picked up the new batt along the way, same deal, I called the 1-800-XSPOWER number and they gave me the # the to closest dealer and he (Wayne, GOOD DUDE too!) drove down and met me too! The SMD is REALLY STIFF right now, I talked to Nick and he said it will be like that for a little while, so that's why I didn't have it playing in the vids... Mids aren't in yet....

Welcome to SSA!!!

You don't!!! I had a cap, herd alot of bad about them, then went to autozone and got a marine batt. for $35, I could hear a difference.

Hmmm, how "bad is the SAX-100.4?

^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ X2 I gotz ny new 15"...... Can only do 17" high, but it worked great before with my 15" Havoc....

4 hrs away from Norfolk, VA, So close but SO far!!!

Nice build! Can't wait to see more!!! VA !!!

I have a '97 Grand Prix with a 220amp alt. and a 1.5v booster on it. I have a SAZ3500D BNIB, and will be picking up my 15" SMD in a week. I already ran the big 3 with 0 gauge and 2 runs of pos. & neg. to the back. Now I am looking at atlernators, should I get a 300+ alternator or can I run another 220amp alt. ? I can get another stock rebuilt to 220amps for about $200 and I know a couple welders that want to build a dual bracket, they are hard to find for a 3.8 V6, as are 300amp alts.. If I do get a 300a alt can I get by with just that one? And what are some suggested batteries for each setup? THANK YALL FOR YOU INPUT! I did try to search for my answer...

Whats a voltage adjuster ? How much for paint

I can make a vid showing why I need it....

Will it feed a SAZ3500D in a 97 Grand Prix se, I got the big 3 with 0 gauge, 2 runs (4 total) of 0 gauge front to back, lookin for some XS3100 batts... SMD 15" here SOON!!!