jrouter76

how did you get .48 cu.ft for port displacement?I used this formula:3.14x4x4 r^2 x L/1728 3.14x4x4x22=1105.28/1728=0.64 cu.ft.

Thanks GuysNow I know for sure.

Hey Sundown why is there no enclosure recommendations on the Zv2 on the subwoofer page also for the Nightshade too? I see recommendations for the SA series and other series.

where on the Sundown website did you find this info? is there info for all the subs?

I`ll look and see what the SA series line recommends....btw why is the SA series so popular?

Enlighten me please on "gudieline"

So should I go with The Z v2s or waait on the v3s if I`m looking for MORE output?

Hey Sundown I "heard" That The Mags and theZs would be about the same in output with the same power to both subs, is this true or is someone blowing smoke up my .........?

Sundownz I just sent you an email

don`t you mean the v3 motor will have more strenght or am I wrong? your wrong. ok thk you, now tell me what is the trade off between the v2 and the v3 with the difference in motor strength? what will the outcome be

don`t you mean the v3 motor will have more strenght or am I wrong? your wrong. ok thk you, now tell me what is the trade off between the v2 and the v3 with the difference in motor strength? what will the outcome be

Big Body just how good do the Z`s sound? I don`t know if you have played with The Mags v3 that Nick came out with about 5years ago or the Brahmas, but if you have do the Z sound just as good and get damn louder?r

my box is 37"w x 18"d x 17"h and tuned to 32hz

don`t you mean the v3 motor will have more strenght or am I wrong?

Sundown said it was ok to use your existing box(3.5 cu.ft.) tell me what are the outside dims for your box and how long is your port and width....sorry to be asking you all these questions but, I`m thinking about using the exact same setup with the Z v3 subs minus the amps. Any help I would appreciate.

I have built a boxthats tuned to 32 hz,after port and spkr displacement i have 1.0 cu.ft of space left, my question is will this work or will i need to build a different box this is a dual ported box and it is for 2 12 mags new version....also if this will not work how about a sealed dual chambered box with each chamber @2.2 cu.ft.,will this be to big sealed? btw the amp is a DEI2400D(1400watts @ 4ohms, 2400watts@ 2 ohms)

I`m in southern Illinois,,I`ll probably be getting in contact with you soon

thats 1.0 cu.ft per sub and if i go sealed that 2.2per sub

I`m a newbie here at this forum so be paitent with me...I need to know what size port to use on a 12 mag tuned to 32 hz? how do i convert square inches into w x h x l for the port i will be using a slot port Nick said that i would need a least 24 square inches...correct me if i`m wrong but would`nt 24 sq inches be like 12" x12" or 12^2?