NickRuby

so i can get it coated in nickel and then dipped in chrome? any idea whats cost of that?

i was lookin at the wide spray dupicolor can those look good for my project

"A loose wheel and some good ruge will be best." i dont get that. i have some handy bits for my dremel it has everything i need to do it and do it fast oh and i looked at the paper and its 400 was the last grit i used, 260 was the 1st to get the grey off from the powder coat.

i personally with 1 sub would go with a 2.5 to 3 cube box tuned to 32 hz IMO 32hz is best for three six, lil wyte, project pat and other chit like that

Go with 2. u will never get the lows you want with just 1 12". i had 2 and disconnected 1 and put my 1200.1 jbl on it alone and it pounded but not near what 600 watts to each did

i would have but the stripping and sanding are done... i finished with 260 grit. u think i should wet sand it before i use a polishing wheel?

Ok yes i am GALLING it at first... how else can i get the black powder coating off, and a huge polishing wheel isnt practical, so ill stick to the Dremel for all my polishing griding sanding engraving routing cutting needs. Anyone know of the best clear coat in a spray can. or better yet a paint gun ???

gualling? what is the chemical make up of this basket... it will polish nicely and have you tryed it? also if i want it "chrome looking" i have to polish it because from my understanding they cant dip aluminum into chrome

Thats true. if it wasnt aluminum i would just go get it dipped in chrome... well it feels like aluminum. . 15k whine from the dremel for hours is annoying but i think it will be worth it.

i finished sanding and filing the edges today ill start with the polishing tomorrow. anyone know the best clear coat that is of course heat resistant and will bond well to a smooth surface. i have a paint gun and ill be usin that probably unless they have a quality spray can out there. Soon ill be bangin it to hell again... the reason the guys at SI put these dank subs together,

thx im excited to see it

Click Here For Pics Username = NickRuby Password = NickRuby

I just Stripped the black powder coating off and im sanding now. Its getting shinny. I just have to raise my sand paper number and them bust out the dremel for the polish and ill clear coat it. it will be nice pics coming asap

i think u r scared to push the limits with the magnums eldorado. use it for what it is, a surerior sub woofer with impecable sound quality that will eat any song you feed it. Take a dose or two while ur at it

Yea its a Pontiac thats probably why the welds broke