Brandon445

Yeah I knew that I just wasn't sure if the delays on the BL's would affect the re-cone since I am just getting a new basket and not a whole new motor

I am sending in my 12" bl and re-coning it into a 15 and i saw on the site that there is and extended lead time on the BL's so my question is will that still affect me since I am re-conning to a 15" and will be getting a new basket?

I noticed that on the first view of the cut sheet for the bl 15 that it says the width of the box is 33 3/4" but on the other two views it is 34" , is that some kind of mix up or am I missing something?

alright well thanks for the help

I forgot to say this earlier but the guy who built and installed the sub in the first box I had might have wired it wrong. I took the sub out to re-wire it with some thicker speaker wire and I used a diagram that someone post on here from 12volt.com and I'm not sure what it was wired to but it definetly not wired the same way as the diagram and this was when i first got the sub and i was using it wired like that for a couple weeks so could this have damaged it and just over time the voice coils blew because of it?

No it sounded just fine and they just cut out and no the sub doesn't work

No it sounded just fine and they just cut out and no the sub doesn't work

The box is 2.5 tuned to 32

I live in Stillwater. I have a Kicker zx1000 and I had the gain a little over half so I'd say roughly 6-700rms? My electrical is all stock but i do have a red top battery

I live in Stillwater. I have a Kicker zx1000 and I had the gain a little over half so I'd say roughly 6-700rms? My electrical is all stock but i do have a red top battery

I have a 12" bl and today I am pretty sure I blew the voice coils on it. I was driving around and the sub cutout and I opened the back of my jeep to see that there was smoke coming out of the port. I know for sure that I had everything wired right and i didn't even have the gain up that high( a little over half). I am going to re-cone it but I was wondering if anyone knows what could have caused this so I don't blow the new I get. Thanks

I turned it up and that seemed to fix it. Thanks for the help

It was kind of hard to tell but I held a tape measure up to it and it looks like it starts doing it around 2"

I have a 12" bl and and I recently built a new box for it. I noticed some what of a clicking sound coming from the sub. At first I just thought it was something rattling in the back of my car but today I went to check it out and noticed it was coming from the sub. It only seems to do it on the low notes and it doesn't do it every time either. I can't seem to figure out what or why it is making that sound.