-
Content Count
4,084 -
Joined
-
Last visited
-
Days Won
10
Content Type
Profiles
Forums
Gallery
Everything posted by pmureika
-
We dont know what he means by low power. im going to go out on a limb and say Dcons lol.. hes an old memeber and unless he has changed in a HUGE way.. when he says low power he means low power. not picking on ya chris. but im guessing you mean 3K or less. SA-15's could be a good choice!
-
We dont know what he means by low power.
-
Nice amp for 4 dcon d4's!
-
I would like to se a build like that to see what it could do!
-
What do you mean by a ass load of power? 4k?
-
Fi 15" SSD subs.
-
2 channel or 4 channel
pmureika replied to 1two3's topic in Amplifiers / Head Units / Processors / Electrical
Alot of us just like to run front speakers and tweeter. Plus the sub no rear speakers.To me it sounds better. -
T/S Parameters for standard Platform 3 15": Revc = 1.5 or 3.0 ohms Fms = 30.8 Hz Qes = 0.42 Qms = 1.34 Qts = 0.32 Sd = 823cm^2 Vas = 101.3 L BL = 22.5 Mms = 272.3 g Sensitivity = 90.86 dB @1W/1m Sensitivity = 91.126 dB @2.83Vrms/1m Xmax = 60mm total Usable Excursion = 3" total Product Dimensions: Overall diameter - 15.5" w/ gasket Cutout Diameter - 14.125" Mounting Depth - 8.75" Displacement in enclosure - .24 ft^3 Weight - 66 lbs
-
Nothing worse then saggy subs.Lol
-
2 channel or 4 channel
pmureika replied to 1two3's topic in Amplifiers / Head Units / Processors / Electrical
new understanding...the crossover allows the tweeters to be run on the same channel as the speakers right? so then you could just wire them the same as the 2 ways correct? Correct. -
2 channel or 4 channel
pmureika replied to 1two3's topic in Amplifiers / Head Units / Processors / Electrical
With that head unit you should use a 4 channel amp to power your 2ways.No to the second question. -
How to wire Crescendo 3500d to 1 ohm
pmureika replied to fred57's topic in Amplifiers / Head Units / Processors / Electrical
Enjoy the thumping! -
How to wire Crescendo 3500d to 1 ohm
pmureika replied to fred57's topic in Amplifiers / Head Units / Processors / Electrical
Did you turn up the gain? -
How to wire Crescendo 3500d to 1 ohm
pmureika replied to fred57's topic in Amplifiers / Head Units / Processors / Electrical
Did you set your gain properly for the headunit you have? http://www.soundsolutionsaudio.com/forum/topic/3704-how-to-set-your-amplifier-gain/ -
Thanks for upgrading me to a 300amp powder coated from a 270amp.
-
How much of a power increase? Even doubling the power won't get you that much louder. You would need a spl meter to tell.
-
Building the proper box is more important then how much power you use.
-
Thats fast compared to stetsom amps.
-
1200wrms would be cool.
-
If he has extra money I would upgrade to the spr-60 speakers.
-
If he can get the R's they are a better speaker.
-
Yupp Those are type s not r. you want the spr-60 these are type r.
-
None of my subs work despite different setups
pmureika replied to mlcantin's topic in Amplifiers / Head Units / Processors / Electrical
Ipods have volume control. -
How to cut perfect circles - Video Tutorial
pmureika replied to mklett33's topic in SPL & SQ / Fabrication
3/4 mdf is my guess.He was refering to that ply wood of some type