pmureika

How do you have the positive from front to rear and yes I would ground the rear battery with as short of wire as possible. I don't like to go more then 2 feet. Also could be the amp? Any pics you could upload?

I hooked this hds210 to my amp and then adjusted the gain and ssf correctly. I then played it as loud as I could with no distortion. That's how I break subs in. Never had to baby it. Never burned one up yet and I have done a lot. Not all songs are recorded the same, so you will have to use the volume knob on some tunes.

What do you have to play them? Or did you mean after you have all you stuff?

Thanks for the website. No problem man....good info there Well this project will be put off due to cash flow for now.

Welcome to the ssa forum !

Have you heard this shit from this forum? Because you seem to be a newbie. You need to calm down. Their are better choices like jay-cee gave you, but you can use what you have.

You can lay agm batteries on their side if you need to.

Looking great so far ! I'm glad "Q" got you going with the pics,

Nice job !

Thanks for the website.

What are you using to post pics?

Looking good!

You should have tried us acoustiks from ssa.

Damn these smart phones

Where and how much do I apply to the doors

Yes it is a plastic panel.

I agree 100%.

You are correct sir! lol It's amazing hearing the difference between tapping on the rear doors vs the fronts now. Guess it's time to pull the rear panels and do those too, even though there are no speakers in those doors. The handles are vibrating like crazy.....hopefully that will help to solve the issue. What I hate is all the plastic panels that rattle. Agreed. The one that's giving me the most problem is that plastic frame over the license plate that holds the latch release and license plate lights. I did some deadening in the hatch as well and it seemed to help quite a bit, but there's still a little noise (much easier to live with now though). The problem I found was when I went for spl it caused a lot of problems. Like shaking everything lose. That's why I go for sq now not spl.

Couldn't agree more. Was a play on the discussion. Sure it reflects how I and most of the board feels, but it would be a further waste of money on the end here that pads some asshats pockets. Self defeating in that respect. See I took it as a play on one of the "Smash my xbox" type things where we go get an xbox just to say we were going to give it away to someone only to have them watch us smash it first. I guess that it is kind of mean and a waste, but I've wasted my money on other stuff that didn't make sense and was a waste. Find a used one for sale? And then show why it is only good for one song or hz.

You are correct sir! lol It's amazing hearing the difference between tapping on the rear doors vs the fronts now. Guess it's time to pull the rear panels and do those too, even though there are no speakers in those doors. The handles are vibrating like crazy.....hopefully that will help to solve the issue. What I hate is all the plastic panels that rattle.

The sound goes in instead of people hearing it outside the car. lol

Why is it the faster you clean the rain gutters, they still get plugged up?

I don't use one because of space.

It will give you voltage but not as good as measuring at the amp. I have a upgraded alternator and only running a 400 wrms system know. But I still get headlight flicker because the voltage regulator can't react fast enough. Like Alton said as long as you are getting around 13 volts to the amp you are fine. Unless the dimming is real bad just check the voltage. I have one of those it is better then nothing.

What is he recommended box size for a HDS210?