pmureika

xcons are still my choice.

Glade to hear.

Well said!

Best I can do is a single 15 xcon on 2k.

Granted he's only running 3k Don't think you need much more for a daily driver.

Can you still hear. For the time being. Until I do 4 18"s in a wall with 4x the power I have now! >:-]

Can you still hear.

I had the lucky expereince to hear two 18 xcons powered by a sundown saz 3500. All I can say is awesume.

Why dont you use volt meter right away?

I have a custom made box for 2 sa-12s I sell for 50 plus shipping.Whats it going in?

who would you reccommend? Check out DC Creations, or RAM Designs. Prefabs are usually tuned very high with nowhere near enough port area for the frequency that they are tuned to, or the drivers that are being used. But they sure can carpet alot better than rick!

Learn how to carpet would help.

Time to get the dmm out. Stereo installers best friend.

So is acetominephen. Try again Pete. Acetaminophen is correct. Or tylenol name brand.

So is acetominephen.

Welcome.

Dont take more then the prescribed amounnt of vicodin or percocet because these contain tylenol plus hydrocordon. To much tylenol can cause liver damage or complete failure and death.

A agm battery will help solve the corrosion problem and match your battery in the back. use agm front and rear.

You could be just running off your optima. Is the starting batery a agm?

Are you using agm batteries?

You could get wire slap doing that.

Get the sax 100.4 great amp.

Nice build.

Also when breaking in a flat tappet cam keep the rpm's up around 2 to 3 thousand rpm for at least a half an hour or more no idling. Don't you just want to vary the rpm range, so nothing is constant? They dont recommend any breaking in.I found it best to give it a dozen or so full throttle acccelerations.

Also when breaking in a flat tappet cam keep the rpm's up around 2 to 3 thousand rpm for at least a half an hour or more no idling. there is no breakin for the newer cams and engines. as far as subs go most new ones breakin very quick.