whitemdx

Hi, I bought a 12" Arsenal last year, due to moving and my error, I caused a tear (bout 2") on the sub surround and cone. I checked AA website, but it's offline. Do anyone have AA's contact info or pricing on reconing a sub? I already bought a new setup (RE MX 12") but figured i repair the arsenal and toss it in my girl's car. Thanks!

I see that the 1500D have 2 sets of speaker outputs. So the easiest way is to get dual 2 ohm, hook it up in parallel, then the internal are bridge for a final 1 ohm load. What if I were to go with dual 1 ohm (1 sub) wire it in series = 2 ohm, then bridge the connection to the amp, will i get a final load of 1 ohm? I can't tell from the manual if the external outputs are bridgeable. Please confirm. Thanks!

I just picked up a sundown 1500D and now looking for a good sub to mate. Have my eyes on a 15" Q. Do you guys think I need the BP power option? Chances are i will set the gain to about 1200w anyways, b/c, I currently have 4 awg power. If i absolutely need to upgrade to 2 or even 1/0, i will. (I will be running a SAX 100.2 as well). Thanks!

I think that a little too much, and will be difficult to find an amp for 'em. hmm..3 4 ohm || = 1.3 ohm, 3 dual 4 ohm can into many different combo of series and parallel i don't even want to think about..

Hi all, I am in the market for a system and have decided on Soundsplinter...Here's is my dilemma: Car will be 2002 Honda Accord Coupe, and here is what I have planned: HU: Pioneer DEHP9600 $400 Front: Rainbow SLC Kickbass 6.5" Comp 280 Rear Fill: some decent 6x9 100 4-ch amp: PG Xenon 100x4 (100wx4 @ 4 ohm) 300 Sub amp: Kicker zx750.1 300 Sub: Soundsplinter I was gonna go with 1 12" Rl-p w~ 750W after reading many positive reviews from caraudio forum. I want clean, tight, distortion free bass with decent output (used to have a brahma 15 and that was too much). I planned on a ported box 2.0 ft^3 tuned to 32Hz. But this box is a little larger and the install wouldn't look as clean as I would like. So I want see what you SS's expert think about this: Sound I go with 1 12" RL-p sealed in like a 1.5^3ft box w~ 750W, or 2 rl-i 10" sealed with same power? If I go the sealed, chances are I am try out fiberglassing. Thanks and sorry for the long post...