orlando144

I hear the new T2's are designed and built better than the previous T2's. I built a box for one of the new ones and i liked it alot. For 600 a pair i think is a good deal if they are in good condition. 3.5 ohms for the coils seems a bit odd but i dont think it would be much of a problem. For 600 you can also get other subs like Sundown, Fi audio, SSA or others...

Looked like a fun show. I saw your signature Jon.. 149.5.. Closer to the 150 And happy early birthday Steve

What is FEA? Like when companies say FEA optimized motor structure..

I say put the Kicker in a ported enclosure tuned 28-32 hz and let it rip. Dont think much music gets down below 25hz. Unless you slow down a slowed song already... I had a 6 1/2 inch sub in an enclosure tuned at 30hz and it got plenty low, unloaded it towards a wall and played better with frequencies.

Happy birthday! Thanks for all the support to the SSA community

Sup guys! I was wondering/ asking myself.. On birtsheets from Rockford Fosgate or Kicker, etc amps, why do diferent wattage ratings come up on birthseets? If a zx2500.1 is built the same as the next zx2500.1 built why would one say I.E 2,753 vs the second amp that says 2,945? If they both consist of the same parts and what not, why would power variate instead of being similar? Thanks for the input

its a bigg ass trunk but the most ive heard of is 2 18's in a newer style crown vic. forsure not ported is what im guessing. maybe sealed, 2 21's would need over 18 cu ft ported unless your gonna compete using a small high tuned box.

100% correct. Every part inside the amp has a tolerance. If you measure the resistance of a 20k Ohm resistor, it generally won't be exactly 20k Ohm. The nominal impedance is 20k Ohm, but the measured may be 19.87k Ohm. These tolerances add up when you have many parts. Theres where your differences come into play. Finally got it! i was kinda confused about why there would be diferences, Makes sense now, thanks guys

Ohhh so then there could be 1000 amps from kicker doing all the same? 98gmc seems understandable

I used to run that same amp and it was had okay power, for electrical as stated above get rid of the cap.. The amp draws alot of current and can get really hot without the good electrical Mine would be a stove after 10 minutes of dipping voltage

Dam thats a steal! I loved my hcca. I remember i got a Soundstream xxx 15 for $200. It would hands down murder any other sub i had for power handling and output. You scored with the find though

As far as speakers look at sonicelectronix (dot) com And amp kit you can get from Cadence or Knukonceptz on ebay for a great price.

For an amp kit look up Knukonceptz They have great wire fore a really good price.

Ohh and get a dual 2 ohm BTL. Wire it in parallel ( pos to pos, neg to neg) for 1 ohm load.

What's up with this state talk? This forum is supossed to be known for being peaceful and full of good people. Come on guys OP... Good luck with your selection, you will enjoy a BTL

Alpine 9887 Dayton Pro Audio 6.5's Cadence Zrs crossover's and tweets Rockford Fosgate Coaxials Soundstream Dtr 1.3400 @.25 ohm 4 Sundown Sa-12's 9.1^ft @ 34hz Duralast Gold battery and Kinetik HC600 150.8 outlaw 2002 Tahoe

Well done! Heatwave is right around the corner.. Hopefully you gain a few and compete

Ha good to see you guys had a good time. Your job always keeps you busy Jon. Happy easter

Ive heard 2 hdc4 12's and i loved them. Got very loud and sounded very smooth not punchy like the hdc3's ive heard. Depends mostly on the install

Representing Sundown like a boss! Congrats on the win.

Im in school so i cant see the video.. Ive heard several cvr setups before and they are decent for their price. I beat the hell out of my sa-12 for 35 minutes and it was bearly warm so i just tore it up.

T-line's require quite a bit of airspace sometimes. Versus a simple ported design will be more convinient and sound good if done right. It's less labor for you and less of a hassle for him in case he needs to take box out and what not. Just my opinion.

Kinda wondering on the single baffle but you know the build better than myself. How do you figure out port tunning with a port of that shape? Beautiful build btw

Exceptional customer service! I bought 2 Sa-12's locally but forgot to take my DMM with me so kinda took a risk buying them.. One came out to be dual 4 ohm which the guy "didn't know about".. Ohh well. My friend ordered a recone for me but put no adress and left out some necessary info. I get an email from Debbie at Sundown notifying me about it and asking me the info that was left out. Before my friend ordered it I asked Jacob questions on pricing and how about to order the recone.. Didn't take much for him to get back to me. For the amount of emails he receives and work he has to do to get things taken care of, I am impressed I love their CS and products. Will definatly support Sundown Audio from their services to their products. 4 Sa-12's coming up

Yeah I was always gonna try staying with Fi Audio but Sundown is now thrown into the cake.. Lets see if i will break the mid 50's Sundown Audio FTMFW!!!