II N S 4 N E

well i have the big 3 upgrade with all 0 ga and when i get the new amp ill be replacing my 4 ga that i have running to my amp in the trunk with all 0 ga The big 3 helps the flow of power from A to B, it doesn't however add power. So you still have a stock electrical. Due to your drivers dcr, you can either wire it to 0.5 or 2ohms. 0.5 is a bad choice unless you know what your doing, and you clearly do not or you wouldn't be asking. I'm assuming this is your daily vehicle, playing music, etc. So your gonna want to wire it to 2ohms. As several have stated, look for an amp that makes 1000-1500watts at 2ohms. If you do get the kicker zx1500, your going to need an inline ssf (check out fmods). alright yeah ill consider getting that kicker its a pretty reasonable price but are there any other good brands of amps thatll fit my situation like Rockford or hifonics? Buy an MB Quart dsc2000.1 and run it at 2 ohms for a cheap ($300) clean grand worth of watts. I've installed over a dozen of these amps, they work just fine with great THD and a 1000 watts+ verified. I'm sure I got one laying around I've clamped them before and gotten over 1000 even at the 50 Hz range, ill go clamp one tomorrow at work and post the pic if you want proof. Or buy two reasonable (500-1000 watt) amps and strap em for that power/impedance combo alright ill check that out but how big of an alt would should i look into?

well i have the big 3 upgrade with all 0 ga and when i get the new amp ill be replacing my 4 ga that i have running to my amp in the trunk with all 0 ga The big 3 helps the flow of power from A to B, it doesn't however add power. So you still have a stock electrical. Due to your drivers dcr, you can either wire it to 0.5 or 2ohms. 0.5 is a bad choice unless you know what your doing, and you clearly do not or you wouldn't be asking. I'm assuming this is your daily vehicle, playing music, etc. So your gonna want to wire it to 2ohms. As several have stated, look for an amp that makes 1000-1500watts at 2ohms. If you do get the kicker zx1500, your going to need an inline ssf (check out fmods). alright yeah ill consider getting that kicker its a pretty reasonable price but are there any other good brands of amps thatll fit my situation like Rockford or hifonics?

but do you think i should go with a sundown sax-1200D, saz-1500D or maybe even a audioque 2200D?

well i have the big 3 upgrade with all 0 ga and when i get the new amp ill be replacing my 4 ga that i have running to my amp in the trunk with all 0 ga

i got a BL 18 with dual 1s and might be getting a sundown sax-1200D so do you think running it at .35 ohms is safe?

hey guys about what size hole do i gotta cut out for the BL 18?

well its going in the trunk of my 96 blazer and itll fit in there pretty good so ill play around with it and see how it sounds When you said trunk, people in here thought the trunk of a sedan or an actual car which is closed off to the cabin. In this case, this is a whole new scenario. Usually subs up port back leads to more output in that type of car. Chevrolet Blazer if I'm not mistaken. But next time it would be better to specify more about your setup so people won't become confused and mislead. yeah sry bout that so i guess ill go with my bl facing up and the port facing toward the rear of the car nd see how that sounds

well its going in the trunk of my 96 blazer and itll fit in there pretty good so ill play around with it and see how it sounds

alright yeah ill try it because i got i just ordered a BL 18 and im making a box thats gonna be 6.8 cuft and tuned to 33 hz think thats good?

hey guys i have a question do u think that having the port firing towards the trunk or firing up would make a difference?