RidinLoudProditons

go to nightmareaudio.com I have him do all my designs for me.....IMO hes the best out there.

Thanks.....no. its really a 6th order bandpass....with the sub firing into the port like that it works as a front chamber.....it is pretty much just a fancy looking slot port box that front chamber does not make much difference in the output.

Well I started building me a new subwoofer box for my fusion powerplants FPW 1200. figure ill post some pics of it on here. It was design by nightmareaudio.com accept for the plexiglass window I put that in. Right now im about to start painting it. but heres the pics. have any questions feel free to ask outer shell half temp assembled almost totaly assembled router port edge gut assembly drying screws that im using for the subs working on framing up for the plexiglass Testing some light positions Pretty much finished

BUMP FOR SOME GRAPHIC WOOD need to increase front stage budget ( :

Thanks duane.....If you want. make another post here with the track titles and what they peak at. up to u.

Well, had some issues for testing did not go over as smooth as I was hopping but they sound good. the power they can handle IDK but sq wise I think they performed pretty good.

yeah that is a nice feature on them, Fusion honestly puts some nice features in there products Like there old powerplant subs. each terminal had 2 connections to make wireing them up really easy so your not trying to shove to wires into 1 hole. Also they was the first one to have a head unit you put a IPOD inside of. it has the hole on the top front, with a screw in from the side, then a hole in the side with the screw for it on the top.

Well I got my 4 channel back today after dinner im hook it up to give a quick test to see how they sound off a amp. its a JBL cs 60.4

Yeah. I know fusion is not a huge brand in car audio now days. I love there old stuff, dont have much experience with there newer stuff. I had them hooked up straight to a head unit and sounded pretty good but would not take it at 75% volume the suspension was maxin out with all settings default but then again that was total free air. plus just being a head unit most likely had some distortion 2. once i get my 4 channel amp back im hook them to that to see how they sound maybe create a baffle for them 2. Just was more curious if anyone has mess with them so I know if they are really even worth keeping around and possibly using or should I just resale them. I am doing a killer front stage maybe ill wire them up for back stage just to do it for sh its n giggles

Well I just got my pair of fusion 5 1/4s I won off ebay today. Wondering if anyone here has any experience with them. Not 100% sure what I am going to do with them. But They came brand new in box for pretty much the cost of shipping so could not pass that up. Got some pics and will post the specs max 160 rms 46 compliance cms 794 cone area sd 8.2 d c coil resistance RE 3.2 electrical q qes 1.34 force factor BL 2.76 free air resonance fs 70hz frequency response 70hz-20khz impedance 4 mechanical excursion 11.5 mechanical q qms 4.34 sensitivity 86.3 total loudspeaker q 1.03 magnet structure 8

couple theory of a deadman a metallica and ALOT of 2pac. my email is in my sig you want new, send me a track or 2 or w.e you want to hear done.

no need to be sorry...There bit rate should not be 2 low. Then again I did do these at least a year ago, I dont remember what I did them at.

99.9% they are. I used adobe audition to do these and I made sure none of the spikes peaked out and it has a volume bar that moves with the musics output and I always made sure to keep that from peaking out 2. I know a few tracks other people have ran tests with and came back clip free. I play these at high volume on my 5.25 computer sub and on my home theater system and no blown equipment yet. I can not promise these are 100% clip free just form my knowledge there is not any clippage and my experience playing these there is not. I am not responsible for your equipment, play them at your own risk, I am sorry if you blow your stuff.

IDK man. just bump the stuff and enjoy it. I would love to know what these tracks peak at. I just adjust them by sound to what sounds good to me. I love low frequency bass. I run a Fi Q 15 in 9 cubic foot sealed for a home theater sub lol

well ummm IDK what frequency they do. Ive tried using software to tell me and for some odd reason can never get it to work and I work on computer.