manrossdamn
Members-
Content Count
528 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Gallery
Everything posted by manrossdamn
-
Wasn't 4k it was 3.6-7k
-
Niceeeee...
-
Good luck! And watch me get more warnings :facepalm:
-
Explains why they have the Cresendo 3K at .5 ohms? Smooth. " Jeeze, such a smart guy
-
Cresendo needs to make a 1K amp that's down to .5 ohms.. then i'd get one..
-
Depends on the car/vehicle My 4Runner has no space for an extra battery to sit around in and barely enough space for my amp
-
I loveeeee my 18" <3 Type R's can't even compete..
-
Don't forget to post a build log!
-
Extend the width and depth to compensate for the height
-
Daaamn..
-
2xSA12 + SAZ2500D = 149.4 db -- Team Sundown Russia
manrossdamn replied to sundownz's topic in Sundown Audio
Nice! -
From: Used, B-Stock, Refurbished Amps, and MISC
manrossdamn replied to sundownz's topic in Test 1, 2, 3...
Still open? And can you link me or give me some specs? I'd like to have some headroom. -
You have that big of a budget?! -faint- I wish I had that much so I can just make systems.. Sundown and Stetsom ftw!
-
Phoenix Gold QX500.1D
manrossdamn replied to manrossdamn's topic in Amplifiers / Head Units / Processors / Electrical
Haha yeah, I don't like my subs playing over 60 hz Can't do too much to his 4Runner at the moment, cause he might sell it and get a Jeep.. -
Sundown SAZ-2500d
manrossdamn replied to thauk10's topic in Amplifiers / Head Units / Processors / Electrical
Ohh, I see. Thanks for clearing that up -
Stereo cuts out at low volume
manrossdamn replied to orangeshoemafia's topic in Amplifiers / Head Units / Processors / Electrical
Turn all of the gains and boost down? Or try to disconnect the speakers and turn it up and see if the problem continues. If it doesn't then there's a short somewhere in the area -
Sundown SAZ-2500d
manrossdamn replied to thauk10's topic in Amplifiers / Head Units / Processors / Electrical
But say you run it at .5ohms or something low and it doesn't blow or nothing overheats, then what? I just want to know cause I'm running a dual 1 Q at 2 ohms and I don't want to drop it at .5.. -
Phoenix Gold QX500.1D
manrossdamn replied to manrossdamn's topic in Amplifiers / Head Units / Processors / Electrical
The SSF is tuned to 25hz since my box is at 29 and the LPF is set at 60hz -
Bye bye warranty Hello sexy ass camery!
-
Sundown SAZ-2500d
manrossdamn replied to thauk10's topic in Amplifiers / Head Units / Processors / Electrical
That's easy stuff. I meant. How does Sundown or any audio company know when you've dropped the amp under 1 ohm. Parallel and series wiring is all easy -
sax 100.4 stereo 1.33 or 2 ohms?
manrossdamn replied to noidle22's topic in Amplifiers / Head Units / Processors / Electrical
x2 for cable guy -
Stereo cuts out at low volume
manrossdamn replied to orangeshoemafia's topic in Amplifiers / Head Units / Processors / Electrical
Just what happened to me but, Check the speaker wires coming out of the amp to see if they're touching happened to me and my amp kept going into protect after a volume of 5.. Good luck -
Sundown SAZ-2500d
manrossdamn replied to thauk10's topic in Amplifiers / Head Units / Processors / Electrical
Dumb question but I'm pretty sure the answer is simple.. How do they know you've dropped an amp under 1 ohm? Teach me somethingg! -
Sells me your amp! Lol Just kidding. Good luck on the install brotheren!
-
I love the12volt Also, are you sure that amp is 1 Ohm stable? All of the new ones are 2 ohm stable.. Makes me cry cause I wanted one