

USAMPFREAK
Members-
Content Count
119 -
Joined
-
Last visited
Everything posted by USAMPFREAK
-
Everybody already gave you the correct info but I will just chime in to confirm that.
-
I never intend to be rude to anyone. As for the time it take for recones, Production comes before warranty in the line up most of the time. As for it being monthes I HIGHLY doubt that. Store owner like to through me under the bus on that one 3-4 weeks is the average in cluding shipping times.
-
If you still need a box shoot me an email to Greg@usamps.com I ran 4 of these in my CRX with very good results.
-
Actually 3 ohms dcr is great on the AX2000. But he had better have 240 amps ready to feed the hungary buggar.
-
No the Xt are our entry level. The most I have gotten out of 1 was 1500 rms@ 0.7 resistive load.
-
US Amps is now repairing all makes and models of our older amps. We will also repair all other brands except Rockford Fosgate. flat rates as follows 1-500 watts 100.00 501-1000 150.00 1001-1500 200.00 1501 and up 250.00 Contact me for details. Greg Carolus US Amps - RE Audio Tech Support / Production Manager 20819 Currier RD Suite 100 City of Industry CA 91789 U.S.A Office 877-267-9360 Fax 909-869-9199 Cell 626-833-2177 email Greg@usamps.com
-
The specs in the manual are the CEA ratings anything other than that is up for speculation I would have to sit down with a resistive load and do EVERYTHING thus stopping woofer production.
-
250 mV to 6 volts on the input stage.
-
After sitting here looking at a XXX with a broken basket. I decided I wanted to make another 1 of a Kind woofer. And let me say this beast wangs. XXX motor with lots of custom labor and a LOT of work to cross-breed an MT and XXX the following pics are the results. And Here is the LMS for specs on this woofer.
-
12 spoke basket < 32mm Actually the basket has been modified so we can get a total of 45mm one way clearance.
-
For all intents they ar really the same woofer. We are still using the same soft parts and motor with a different basket and motor cover.
-
Lesser amps beware..........
-
For all the Haterz
USAMPFREAK replied to USAMPFREAK's topic in Amplifiers / Head Units / Processors / Electrical
Coffee can cutter...... Just because I can lol...... Coffee can cutter........ and WD-40 can cutter -
For all the Haterz
USAMPFREAK replied to USAMPFREAK's topic in Amplifiers / Head Units / Processors / Electrical
No mods straight out of stock to my test bench. -
For all the Haterz
USAMPFREAK replied to USAMPFREAK's topic in Amplifiers / Head Units / Processors / Electrical
Cutting the can with the output of a stupid stong amplifier. -
The TU amps is can be bridged, you must use the outer terminals. The O's are where you hook the speaker wires OXXO OXXO
-
Someone should ask Scott id he knows who has been hangin out by Ryan's package all the time.
-
Stock electrical will not support the MD3D
-
That is an older model still a good product will do a conservative 2000 rms.
-
Yes the XT will do rated power and NO the AX5600 is not bridgable.
-
I am Greg from US Amps. And I am sorry if I came across harsh or rude. I try to give the best support I can to every consumer and dealer. If you would like to discuss it further give me a call back and we will go over all of the options.
-
The 2 positives and the 2 negitive speaker terminals are common. It is already bridged internally.
-
Sounds like you need to get an RA and send it in for service. The 4080 chip may be ba but I would not know untill I put it on the bench and do some tests.