agiletick

Okay i have 2 1500d's strapped at 1ohms 4 dual 2ohm 10's gain not even quarter the way up no bass boost or anything have mechman 240amp alt and 3 deka batts was giving someone a dmeo today and all 4 fuses on my slave amp poped 2 ofem literly melted had to use pliers to take out the 2 ends of the fuses have been running this system same setup for awile now then this just happened outa the blue funny thing is was just playing some hard rock music wasnt even pounding the shit outa them like most the time question is should i try to replace the fuses and see or is there something i can do to test it out beforehand so i dont fry something else making it worse its only on the slave amp i pulled the speaker wires ran just the one unstrapped and its fine but i dont wanna touch the other amp untill i find something out

you should call them first they had posted 10 availiable i tried to order 4 then sent me email saying they only had 2 in stock would be awile on other 2 so there site is not always correct

and what does building a box have to do with asking about which equipment i never said i dont know how any moron could slap a box together but when your already investing over 2k in something i would prefer to have it done by a professional with more experience in building the box so if i wanna pay someone another 300$ to build me a nice box how is that any of your concern i asked for suggestions not smartass remarks if thats the best you can do then move along and dont post at all

well i went ahead and ordered 4 sa 10's from jacob friday night anyone know who i should contact about a decent box?

Well my goal is pretty much just loud to the ear. Space isn't that much of a concern. I have 4 10's kickers in there now. Had 1 1500 on them, Ordered a 2nd for when i upgraded speakers. So i thought i would throw it in,With the gains all the way down and see if they could handle it needless to say within 5/10 mins they pretty much was toast was some older ones like 200watts each lol i was gonna replace them with sa's but i kept hearing how good the ns was so was wondering if it would be worth it after talking to jacob about trading in amps i could only afford 2 ns's where as i could still get all 4 sa's i dont compete or anything like that i just enjoy loud bass dont think the sa's could handle the 3500's so that was not even a option electrical should be sufficient have 1 mechman alt in factory location and had ac removed with plans to add another if needed but with the 2 1500 and 200.4 never even droped under 14.4 which i dont play it for very long 30 45 mins tops in 1 go its more of a toy car have 7 batterys in rear only using 4 atm so plenty of room for bigger amps imo was thinkin maybe 4 sa's on 2 2500's they might handle that

i have a 98 eclipse and i am tring to decide if i should run 4 sa-10's on 2 1500d's or 2 ns 10's on 2 3500d's wondering which would be louder to the ear what do you guys think and i know you wont know untill its put in and tried just wondering about basic assumptions and what kind of opinions i might get

Interior Seats: '05 Grand Prix with chopped headrests wrapped in vinyl and suede Dash: Smoothed and painted Gauges: Stock and working with engine swap Misc.: Door panels smoothed and painted, Billet Specialties steering wheel, billet rearview mirror, and billet grab handle Performed By: Owner and seats by Loop Stereo Head Unit: Alpine head unit in glovebox Mids & Highs: Diamond Audio Subwoofers: 15-inch Fi Audio BL-series Amplifiers: Sundown 1200 for the sub and Sundown 125.2 for the mids and highs Misc.: 10-inch screen molded into dash, KnuKonceptz wire, custom-ported sub box

UPDATE it was the phase knob have no idea what it even does but turned it and the power started flowing like mad about blew my subs outa the box so anyway what is that phase knob even for?

i cant check untill tommorrow car is at work right now was just looking for suggestions before i went back to work in the morning guess i try switching the wires around and see

Okay guess i worded that incorrectly not ACTUAL hot and ground but the speaker + and - i had 100foot of 8gauge power wire so i just used it as the speaker wire and wasnt 100pct sure i got the + and - FROM THE SPEAKERS not the actual power and ground wires

yeah there strapped correctly dmm reads like 1.2 ohm running duel 8gauge ground connects and 8 gauge to subs could the hot and ground from subs being on wrong amps do it?running all red wires after thinkin about it i might have switched the hot and ground around coming outa the box

Okay i have been running a 1500d on 4 10" kickers while i wait for my sa-10's . I had another 1500d in closet, so i decided to go ahead and throw it in,and get it strapped, and ready for the sa's . Heres the deal i had the gain set all the way down so as to not destroy the kickers. Added the second 1500d, and now i can set gain to almost 3/4 and its still not as load as with just 1 amp the single was running 1ohm and the 2 was at 1ohm strapped so .5 each. voltage doesnt drop thats not a issue i just cant figure out why its louder with only 1 amp running if 1 was bad it wouldnt work at all strapped? or could that be a problem?

local shop is who wants 85 for 25 foot thats why i was looking for cheaper online

does anyone know where i can buy raptor 0 gauge wire i have checked bunch of online stores and cant seem to find it i would like to keep all my wires matching but the store here i got it from first time charges 85$ for 25 foot wanna try to find it online cheaper if possible Thanks

i was running 1 set of comp off 2 channels of 100.4 i added another set in doors right beside the first set i plan on running them off the other 2 channels but my wire wont be in for about week so i was just running them all off 2 channels