Branden2202

im in the west bloomfield area by 14mile and orchard lake

I have a 12in fi bl fully loaded and a sundown sae 1200d all 0 gauge wire

2.3cubic feet and the port dimensions are 14.5 by 9.. and 14.5 by 10

Thank god. I am in the middle of building mine. Its my first box and its turning out to be very good. Ohh and you email FI for ur enclosure dimensions

I emailed Scott@Fi for the box dimensions. Is it true that if i use those dimensions, its a prefab box? Someone told me. If i use FI's box dimensions, is that like buying a box right off the shelf?

i got it. it wasent that hard, but at first i thought it was. What i did was pre drill one corner and the other, the right and left side, then i would apply glue, put back the sheet of mdf back then drill 2 screws on the left and right side. Then i would do the middle since it is now secure

I have my 3/4 thick mdf cut. Took me about 3 hours just to cut it. The only thing im confused about is putting 2 pieces of wood together. Would i have to apply wood glue to the 2 pieces, attach them together, and wait till it dries, then predrill, then screw? Im really confused. This is my first box. I dont want the edges to crack.

Does it really matter what RCA cables you use from your headunit to your amp?

solder the wire into the terminal so it will be nice and tight and it will give u maximum power...

im getting my system installed next week. Am i going to get bored of it after a while? Will it not seem as loud as it was when i first put it in because i got used to it? I am going to run 1500 watts rms. i have a sundown sae 1200d, 12in fi bl fully loaded, 0 gauge amp kit, and im going to do the big 3 upgrade. This is all going in a 2010 maxima

nahh my car is goiing to be a lease and i dont want to mess with the door speakers. My friend has 2000 watts rms in his car and he dident change the speakers... you can hear the song nice and clear. I have evrything ready, except i need about 10 feet extra of 0 guage wire for the big 3. Whats the best 0 gauge wire you can buy oh and i need a rca cables good ones not cheap. What is the best website to buy it from. Also im not going to put an extra battery. my friend has 2000 watts rms and he only did the big 3 and his voltage does not drop at all

When i was in my friends car the 2 jl w7's 12's, i could barely breath. It pounded my heart and chest. I want to know if mines going to do that.

Im just saying is that system pretty good and loud for a begginer?

I just turned 17 and im getting a 2010 maxima next week. I ordered a 12in fi bl fully loaded and a sundown sae 1200d. I also ordered a stinger 0 gauge amp kit. Scott@ficaraudio sent me an enclosure that is 2.3cf and tuned to 33hz. I am planning on doing the big 3 upgrade, all 0 gauge and building the enclosure myself. This is the first time im getting a system. Is it going to be VERY loud for my very fisrt time having a system. The sundown sae 1200d is capable of producing 1500 watts rms at normal operating voltage, thats what jacob fuller at sundown audio told me by email. So is that 1500 watts rms going to pound my chest? I have heard, in my school, 2 mtx 7500's in a sealed enclosure. The amp was mtx it was about 800wrms. The wire from the battery to the amp was 4 gauge, and plus the enclosure was right off the shelf. Would i be able to blow this person away? I have also heard, from my best friend, 2 jl w7's the 12's. He has 0 gauge wiring, and the big 3 upgrade. He has 2 amps the 1000/v2. It sounded great. He did not change his alternator or get an extra battery. All he did was do the big 3. Will mine be loud like that?