Slammed

anyone know the magnet diameter of the MLI-65?

thanks for the input

I am thinking about going with Seas Aluminums One more question: How big is the magnet diameter on these mids?

I recommend the Seas Neo tweeters

Im going to pair these up with Seas tweeters

Im pretty sure it wont work out....I tried something like this before (7" Dayton RS with this tweeter) it didnt sound right I thought the Mach5 mids would play up to 4khz without issues

I guess I have to get new tweeters

thanks that is what I was afraid of here is some info on the tweeters: http://www.madisound.com/catalog/product_i...roducts_id=1059 FS: 1800 Hz I doubt that I will be able to cross the tweeters lower than 3khz

thanks for your reply mids on the doors...tweeters pointing towards the driver and passenger on the dash (with mounts)

Im curious to know if my MLI-65 mids will play well from 3khz and down (with a 18db slope) Im going to pair them up with Vifa D26NC05 Tweeters thanks

UPDATE: I have the MAW15 in a 2.3 cu ft box tuned to 32hz The sub hits hard and has good response with rock and trance music...it doesnt play as low asit did in my 3.0 cu ft box (also tuned to 32hz) but Iits good enough for me SQ is good....the bass is not sloppy at all Im happy with this setup

I was graphing the MAW-15 on winISD and it shows that the MAW-15 will do fine in a 2 cu. ft. ported box tuned to 32hz would you all recommend this? this is for someone who is looking for SQ and little group delay thanks

Im still learning about ported enclsoures thanks

I thought it did...just a little

its being given 400 watts and its not moving as much as I thought it would The SR is rated at 300 watts and Ive seen videos of SRs moving alot more. Its wired to 2ohms, it sounds good and gets pretty loud. It just seems to me like this sub has more potential. So, a bigger enclosure will not make my subwoofer louder?