Robert.Metzel

Ok, You DO NOT have to download a program transfer songs from "Bob's" Library on his computer to your iPod. What you do is plug your iPod into you computer and load up iTunes. Then click on your iPod under the devices. Under the Summary tab click the box next to Manually manage music and video's. Now, plug the iPod into your friends computer and load iTunes, tell it not to sync when asked. You can now select whatever, song, album, video, etc you want. Click on your selection and drag it over to your iPod under deceives and drop. We do this all the time whenever my buddy or I gets a new song or album and we have never had an issue. The only bad thing is if you ever want to resync your entire library it will wipe all the songs that are not in your iTunes. If you are just trying to pull off an old iPod I am not sure how that works, but unless he deleted his entire library on his iTunes you could just do as stated above. From what I have read Ipod Dump works great and is free. So go that route if the iTunes library is gone on your friends computer.

Didn't refresh the page to see this before my reply. Yeah, spit out my OJ when I did see it.

haha... I was just guessing since "I" was posted and no one added a period to anything. You kept says so close so I assumed that's what was missing. lol

Out of nowhere Teampapi79 comes and calls out an answer already called. Sorry. By the way, love the avatar. I catch myself doing the same facial expression every time I see it. Lol. Haha I took that one the morning after a long wedding. I. Already stated, but its not a complete sentence without punctuation. And I didn't read the whole thread just scrolled down to reply.

Go.

My stock alt did that when it went out. Static battery was 12.6. With car on the battery read 11.7 and so did the alt? lol

I think the noise ordinance should apply to everything and not just music. I'm so tired of listening to loud ass trucks with straight pipes and Harley's. Those people don't get pulled over so why should we? I have never gotten popped for my systems but I normal have the bass way down and don't bump at night or in neighborhoods. Rarely do I go full tilt. That and I am friends with a few of the cops here and 2 of them have systems themselves.

Had the same problem. Mine was putting out 12.8 volts at idle. Sent it back and they put a tiny pulley on it and said it was functioning fine now. Put it back in with a smaller belt and now I am at 13.3 volts at idle.v Never going to get anything from them again and they won't give me a refund.

I would get one, but I never buy clothes online. Sizing for me is WAY to hard. Super small frame like my mom with dad's height. So I'm 6'6" tall and weigh 160lbs. So i need med width and xl length. Hard to find that size. Pants are even worse! lol If I just go XL it looks like I'm swimming in the damn thing.

You're intelligent. Make a post on a public forum about how small your cock is. Jeez! If 18" is small I might as well myself now!

Ok, I got my new replacement amp back finally. Amp has a sensitivity switch between .1-2 volts and 2-8 volts. My new headunit has 4 volt preouts. When I try to set the gains using the 2-8 volt setting I max the gain and never reach 40 volts (1600 rms). I get around 12 volts on the dmm. When I switch it to the .1-2 volt setting gain goes about 1/3 of the way up and hits 40 volts. Will I damage the amp if I just leave it at the .1-2 volt switch position? And any idea's on why if I have 4 volt preouts I can't reach 40 volts on the 2-8 volt setting? Right now everything is hooked up but I have the amp off on the headunit. Waited 3 weeks to get the new amp back so I am really needing to violate my persons with some violent bass! Its a Kenwood KDC-X794 headunit and a Soundstream Rub1.1600d amp. My old headunit before the amp blew had 2 volt outs so I didn't ever think about it. Any help is much appreciated. I tried to google it but didn't come up with anything. Maybe I was just wording it wrong though.

Answer I received is leaving it on the .1-2 volt switch is fine. That the head unit isn't putting out a true 4 volts. Which I am going to verify tomorrow with a dmm

Sweet! I know the baby thing! went from 2 18's to a single 12 in 1.2 cubes to save room. Now he is 15 months old and I don't need to carry near as much. So now its 4 cubes and 2 12's.

question answered off site... feel free to delete mods.

Don't let your friend touch your stuff anymore for one! I'm a newbie for the most part too and I already can tell they your friend has no clue about what he/she is doing. Its not loud when you turn it down because those were the settings used when setting the gain. Zero everything out on the head unit and start over. Follow this tutorial and just do it yourself. Its super easy and the more you do yourself the more you'll learn. It's your equipment so learning how to set everything properly will also help trouble shooting when issue's like this arise. If possible and the best solution, have a shop set your gains with a scope so everything is spot on. Secondly, I'm running 1600 watt rms on 0 gauge wiring all around ( Power & Big 3) with an optima yellow top and a 250 amp alt and I have voltages issue's on peak notes. So you might wanna beef up your electrical some more.

Kinda late to be asking after you've already ordered it don't you think? 1. That amp will be fine. subs rms is 2000 watts and that amp does 1700 @ 2ohms. So if using a DMM you want 58.30 volts. 2. What electrical upgrades have you done to back this amp? 3. Not sure what fits in an impala as I have no experience with one.

Yup, but some of use don't have $5-600 for an alt though. I went budget because mine is a daily driver and I don't ever compete. Nor do I run it at full tilt all the time. I'm usually at volume 10 when it maxes at 27. I just like having the option to get loud on rare occasions. lol One day I'll get a good alt. Hope they work everything out for you though Memphis!

Specs look nice!

I just sent the alt I got from them back. It was only running at 12.8v at idle on the battery. 14.6 after 1200 rmps. Battery sits at 12.7 volts with the car off. Told me a slew of things to try, none worked of course. So I sent it back for them to trouble shoot. Told them either refund, or a fully tested unit before it ships back. So now I am waiting for them to get it and decided on what they are going to do.

I'm for the Re XXX's too. I had 2 18's in my old Explorer and they were loud as hell and sounded great

That's what I was thinking. Except I picture a sweet wood frame painted black and set off the wall about a 1/8". Then you could mount the roll above and pull through and cut. You can get super white paper rolls for next to nothing from B&H. Are you looking to do flat a screen or with a curve? Super White Paper I have used these rolls before for portrait work. Durable and very white. I did find this article on DIY paper screens and some of the pro's and cons. DIY Screens

WOW! Very nice!

Fi Subs are so bad ass my 2-12's blew my amp! The ssd's were mean muggin my amp cause he wasn't putting out like he should. Long story short the amp shit itself on the output board trying to pleasure the 12's. Its was a sad day! New amp will be here is a couple of weeks though. Hope this one puts out like he is supposed to!

Yes! Dump that Jensen! I just pulled mine and installed my new Kenwood today. To bad my amp took a shit right after. Even without the subs the sound quality is much better.

Thanks! Sent them a service ticket to see if they would try and fix it! Man this sucks! Yet again, there goes my money I've been saving for my front stage! What can you do though right!