icy_chris

all thats left is carpet and to put the subs in and start pounding away

my friends b-day cake

just an idea but if you turn it side ways and mount it between the two buttons by the auxilary/cig lighter drill a hole just so the turn knob and light stick out

i read up on these and you can strap them but you wont get 1800rms two strapped will produce 1800 peak is what their website has tested

i'm waiting for mine the status of my order hasn't updated for a while hope that means its close

Best I could do for now, they're monsters though. oh yea you know how daddy likes it stripped down naked and posing for the camera!!

yea it just takes practice i'm trying to start my own business so i'm trying to get my name out there best way is with pictures i will have more up tonight as i have just completed the cut outs and siliconed the inside all i have left is the carpeting

more pictures

n/p hope that helps

check the subs with a dmm if you have one that will tell you for sure about the subs as for the amp try unpulgging every wire and re plug it in if the sub is good reconect it if it still stays in protect its somthing with the amp my old amp did that to me still havent figured it out yet i think it was the power supply that went on mine

not to good with amps but if you open it up just check for any burnt or fouled conections is a start but other than that i'm lost hope that helps a bit

if you have a dmm pull the subs out and check thier voice coills that will tel you if it's the subs.

yes they can get very expensive i just started my first big build and after 1 month of planning i'm probly 1500.00 into it and still need to get a extra battery and alternator for my electrical so i'm looking at about 750 more and i have one btl 12 and a saz 2000d custom box i built tuned to 33hz 50ft of 1/0 gauge to power everything and my big 3 bigger wire is not cheap i didn't expect the price but i'm too far in to turn back now and i know it will sound killer when i'm done

i was woundering if you guys can give me some input will i tell a difference between using 12 gauge or 8 gauge for wireing my sub to my amp i have a 12" btl w/cooling daily d2ohm ans i got a saz 2000d going to wire it down to one ohm wow just realized i cant spell !!

thank you for the input guys

i have 8 gauge it's just hard getting two into one terminal to wire the sub

i was told at the audio store that if it is too small for my amp i will hear distortion or is that them trying to get my money

about 2-3ft runs

hey i put this post in the wrong spot can i get someone to move it to the photography section thanks in advance

just started my new build for my fiance's brother the box will be for 2 jl 10w3v3's