On3Hundr3dProof

So i got my 3500 v2 and hooked it up (post pics in just a min) im planning in running it on my SA-8 v2s for now @ 4ohm until i get my 0ga and mojos in. it should be be fine cause its not pulling more current than 4ga can handle right? also i ran it at 1 ohm for a moment and carefully increased the volume and i realize its not any louder than my saz-1000d was and watching my voltage im not getting any drop at all at idle. could there be something wrong with why its not pulling any more current than my saz-1000d was assuming it should be pulling way more? just confused at why.

i figure that but what im not understanding is if its trying to pull more current shouldnt my voltage be dropping cause its staying right @ 15.0

What electrical are you running right now?

Been trying to find the cartridges Memphis sells for them but theyve been discontinued. Also i want to recone to 15s.

So i have 2 of the old orange basket mojo motors and im trying to find a place i can get some three bolt style baskets to fit them and recones to rebuild them and run about 1750w a piece on them. Any ideas where i could find some parts?

So i have 2 of the old orange basket mojo motors and im trying to find a place i can get some three bolt style baskets to fit them and recones to rebuild them and run about 1750w a piece on them. Any ideas where i could find some parts?

Yeah think I'm doing the type r 6.5s and 6x9s on the kicker amp. Kinda wanted to try the polk mm's but the 6x9s are too deep.

so im looking at getting new mids and highs to compliment my MOJOs im putting in. im looking for very loud to keep up with the substage but also still great sq. im most likely going to be running either option on a Kicker 11ZX650.4(http://www.crutchfield.com/p_2061ZX6504/Kicker-11ZX650-4.html?tp=35782) 120x4 @ 4ohm. looking at either IA 6.5 and 6x9 coaxials or Alpine type R 6.5 and 6x9 coaxials. dont have any experience with either set and wanna see if someone can lead me in the right direction for my goals.

anyone know anything about CDT Audio speakers and how they perform?

those look a little over my budget. might be doable though. they really worth the price? 650+ for 6.5s and 6x9s..

little um...colorful for my tastes lol.

wow epic build coming along very nice.

congrats. your story is very inspiring as ill be celebrating my anniversary on valentine's day as well.

wanna run coaxials in stock locations right now. open to other suggestions also. only reason i wanna run the kicker amp is i can get new kicker products dicounted. how are soundstream SSTs?

the m classes run 40-50w and i really wanna get an actual 4 channel instead of the power pack. also 6x9s are in my front doors lol and the 6.5s go in the rear doors.

ouch.. hope insurance will cover the crack.

it was on caco. really trying to look into these cause ill be ordering some batts within the next month. i was planning on going with 2 deka 9a31s but not sure if i should do these instead.

good stuff!

Im reading the voltage from the amp. Also im not getting any whine at all from my mids and highs. Im currently assuming its not from the alt but is related to the amp going into protect. Ill be getting a new 3500 v2 soon as the preorder ships and ill wire it down to 4 and see if it gives me any whine in which case its coming right out til i fix that.

well my voltage is down to around 14.9 @ idle and 15.2-15.3 on the highway at 3k rpm. i cleaned up my ground and moved it and cleaned my big three ground up. still getting a whine coming out of both subs and my amp goes into protect when i get it to a certain volume

Ok so today i drove and my amp started cutting out and cpming back on now im getting a whining noise from my subs with or without the HU on. Also getting a faint whine from my alt. Disconnected the amp for now and gonna try to take the alt out later and put in oem. Could it be my batt? Cause i checked its sitting at 12.5ish and reading charged.

yeah at the current time with my saz-1000d when it was sitting at 15.5 i was playing decaf shit at full tilt and dropping to 14.8-15. i sent a message to dc and will call them when theyre open but looking at my alt test page on their site it has an internal regualtor and the tested voltage setpoint was 15.33 so im guessing when its sitting at 15.3 thats supposedly normal. its normally hitting 15.5 or so when im actively driving and not idling. im gonna put some 9a31s in later in feb and dunno if that would help anything. hopefully dc will tell me something but sometimes they take a while so still down for suggestions lol.

I wish your family the best. Definitely a worthy cause.

ok well this has escalated somewhat. voltage likes to come up and sit around 15.5ish now a lot and tonight on my way home it was at 15.8 for a few moments. think its starting to get hard on my HU cause its getting pretty warm of course my truck was on for about 2hrs. dunno if theres anything you guys know to do to fix this or if it may be the alt in which case i need to talk to DC but any help would be appreciated.

Run 1/0 ga @ 1 ohm and keep the gain down like watts said and running a volt meter from the amp isnt a bad idea and the stinger ones are only like $20-$30