On3Hundr3dProof

Happy Birthday!

welding wire. buy it. dont skimp on wire bro.

very impressive results! still waiting for a warmer/less windy day to try a hairtick on the new build.

yes lol. -5 and still riding around with the windows down!

welding cable https://weldingsupply.com/cgi-bin/einstein.pl?Next::1:UNDEF3718381:OR:terms::PA#A2 wiring multiple batts. diagram is like the 5th post down. http://www.caraudio.com/forums/wiring-electrical-installation-help/387885-how-wire-multiple-batteries.html

this. what electrical do you currently have to run this?

nice job looks very clean so far

One of the XP3000's showed up today other will tomorrow.

well figured i might as well post a build log on what ive been putting together. just a few pics to get started post some later of the box and what not. 2 15" Memphis CM MOJOs(have) or 2 15" PSI custom reconed MOJO M3s(ordered) Sundown SAZ-3500D v.2(have) DC Power 270XP(have) 1 XS Power D5100R(have) 2 XS Power XP3000(ordered) 2 runs weldingsupply 2/0AWG (have) enclosure designed by PWK(built) update: box and subs are in running off the saz-3500v2 @ 4ohm til i get batts and wire. keeping Memphis MClass mids/highs will upgrade in the near future

2/0 came in today.

ive seen them but havent seen or heard them in person. look pretty nice though. i ordered my PSI custom recones for my MOJO M3 motors so once i get them im gonna put them in and see how i like them compared to the MOJO CMs

wire coming in tomorrow and batts on tues so wont be able to get them in til next weekend most likely.

looks great. i really like "blacked out" looks

also going to be getting 2 15" psi custom recones rated 1800w for some older Memphis MOJO M3 motors. gonna try them out and compare and see what i like better.

a few pics of the box. phone was dead when we put the front baffle on. welding supply 2/0 ordered.

since i put in my DC 270XP the charging voltage likes to sit high at 15.0-15.3. how can i adjust the voltage or lower it to around 14.5-14.8?

so some interesting information on this topic. after talking with DC power they told me to take the blue sensing wire coming out of the alt, cut it, put a ring terminal on it, and wire it to the alts hot post. apparently the vehicles sensing wire in some import vehicles is too small and the alt doesnt get the full signal and causes higher voltage and jumping and spiking. so last night i did this and now my voltage is 15.1 at cold start and dropping to normal.

well psi got back to me so im gonna get 1800w recones from them.

i know the amount my truck flexes in the winter up here(-40 though 20) is severely less and it does seem a little quieter.

well i sent PSI a request telling them what i had a few days ago but no response yet. either way i have these motors and id like to do something with them besides use them as a paper weight lol.

looks sick man! have to say first time i saw the evil i nearly pooped myself.

been looking for specs and sizes on these coils and i found the ID OD for the ns v1. cant seem to find much on the mojo. havent thought of any box designs for it yet, it would be nice if i could do a direct swap from the box im building for my CM MOJOs which is 3 cubes per sub @ 32hz and 93" of port area. dont have any calipers but the vc gap on the mojo motors is about 3/8" and its 4 1/4" deep from the top of the pole piece(3 3/4" from the front plate). sundown Z v2 ID 2.97 OD 3.25 i found.

yeah i saw a tutorial on caco of someone redrilling a basket to fit on the newer CM MOJOs. if i can fit an 8 layer coil in the gap i would like to try either some NS or Z parts from sundown or some ZCON parts from ssa if it wont fit an 8 layer then maybe XCON parts if the vc is the right length. really hard to find dimensions and specs from the old mojos though.

well i cant find any of the original parts to recone or a new cartridge like memphis uses, and although i am talking to psi about a recone but i would like to use some ssa or sundown parts if possible. how wide is the coil on a nightshade v1?

well heres the pics!