erik67111
Members-
Content Count
113 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Everything posted by erik67111
-
im looking at both woofers and i was just wanting to get some input from people that have exprience with both or either one on how many watts you had on the box specs and options you had on the woofer and what you liked or disliked about that woofer and what woofer you would reccomend in that price range
-
i was thinking of getting two nightshade 18s and stetsom 7k at 1 ohm do you think the nightshades would be able to handle it or should i wait till this spl monster that jacob has been working on comes out ps jacob do you know when youll be releasing that monster
-
im just gonna go with the stetsom 5k
-
what about 2 audioque 3500's would they work well
-
if anything i would get 2 3500's strapped
-
yeah thats what i was thinking the 5k is enough and it would save money on both on the amp and electrical upgrades
-
yes but its 3x the rms needed i think im gonna save some money and get the 5k instead
-
from my calculations the box is 10 cu ft and it tuned to like 44 hz what sub and or subs and what are the max deminsions
-
run your ground to the frame if you cant run it to the strut tower
-
New build: Project Shocker! DB Drive - DC Audio
erik67111 replied to Cthedinger's topic in Build Logs
good job almost deadening time -
kenwood kdcmp528 no sub noise
erik67111 posted a topic in Amplifiers / Head Units / Processors / Electrical
ok everything is hooked up right is there a setting on the headunit to turn the subs on or am i fucked -
kenwood kdcmp528 no sub noise
erik67111 replied to erik67111's topic in Amplifiers / Head Units / Processors / Electrical
it works on my other headunit so its probably the ground is there a way to make a new ground for it -
kenwood kdcmp528 no sub noise
erik67111 replied to erik67111's topic in Amplifiers / Head Units / Processors / Electrical
ok i went and messed with it when the volume is below 20 its like playing a 50 hz tone on the subs full blast and when you turn it up over 20 it plays the songs beat but under that is the 50 hz tone still and sometimes the subs cut in and out -
kenwood kdcmp528 no sub noise
erik67111 replied to erik67111's topic in Amplifiers / Head Units / Processors / Electrical
everything work just this morning before i switched headunits -
kenwood kdcmp528 no sub noise
erik67111 replied to erik67111's topic in Amplifiers / Head Units / Processors / Electrical
thats the point i dont have the manual and yes everything is hooked up perfectly -
2 aa mayhems ftw
-
no do it and show us a video of them slapping
-
ok i want eather a 2 fi q 15s or 2 fi bl 15s i will be running 2 aq 1200s i want to know it there is noticible sq difference they will both be fully loaded btw
-
yes that is enough port area but if you want it tuned to 37hz the port only needs to be 21.3 inches long if you keep the length that you have it like 35 hz which i think you would like better. next time you build a box use the rule of thumb 12-16 sq inches of port area per cubic foot
-
welcome if you wanting something louder just build a really nice ported box for them cvrs and if thats still not enough wait till the new incriminator lethal injections come out and swap them out
-
yeah thanks for your reply i think ill go with the qs then
-
what size do you have and have you scored it
-
im getting 4 cvr 12s i was planing on getting the aq1200 but now my friend suggested getting 2 zx750.1s i was want to see your guys opinions on what to do aq1200 is 249 shipped and 1 750.1 is 230 shipped the only thing i dont like about the zx is the low pass says 50-200hz so will it not hit the low cause if it wont i dont want it
-
the feeling that your car stops your bass hits so hard