natedizzle

ok so i have the audiobahn flame q 12's (yes i know not the greatest but thats what i have to work with till later) ok so i know these say 1100rms but im pretty sure thats over rated but anyways i have them in a ported box right now with about 400 rms i think going to each one but i know they can do more cause they are barely moving....so does anyone know how much they can really handle or whats a good mono block that will push them good just not to the limit????

ok so my friend at the audio shop was using his audiocontrol spl meter with and his gates cd in my car....i peaked out at about 51-52hz at 147.7 and on some streatbeat songs i pulled a 147.1,i think thats a decent number for my 2 12 SX's and my nine.1.So are far as in the future for what im gonna do im not sure yet only money can tell...lol So do you guys think thats a decent number for streatbeat or do i need to bump the power up a bit??

was that the right link to the site that was put up cause i couldnt get it to work???

ok so i dont know what the settings should be on this amp so i was wanting to know what suggestions you guys had that i should set them on cause i will be installing this in the morning. here is a pic of the side,if you click on it you can make it bigger and get alot better view if the settings. http://www.limelighthosting.com/~dave/MK800.4/IMG_0986.JPG

i really wanted one of those x2400.1 but i never got a email saying how much it was......

what test tone can i download and use to set the gain on my 4channel???... the 1khz sine wave one???

hey thats where i got my subs from SX hybrids and scott is an awesome guy so im glad he is here.......

well its for the front and the rear......

so im not gonna be messin with the LPF at all???....i thought it was the HPF that you really didnt mess with???

i hear ya.....ive just been biting my tounge cause ive been looking at relocating my amps from my back seat to somewhere else so i might need to save up for that.

ok so while i was looking around for a 4channel(still waitin on pm from flakko) and just for other stuff i came across this and the price looked really good and so does the amp so i wanted to ask you guys if you have seen this before.It doesnt give much info on the amp and i wanted to know like the signal to noise and the THD and all that good stuff.So any info would be good. http://www.overstock.com/?page=proframe&prod_id=1977918

yeah i found the old thread that talked about it and so did some other ppl over at ECA so thats what we have been talking about.

when i saw some pics of the amp that a guy bought it DID say on the side that the freg is 40-250hz...is that a bad thing that it is since you guys thought it was a misprint??? (ok well i looked again and its the LPF that says that)

when is like the due date for the money or whatever cause i was quoted a 200alt for my honda for $300 which is alot better then the 70alt thats in there now...lol.I dont have the money right now but i think ill have it in a couple of weeks.

well if im not going to tell any difference i might just wait on the wires till later....grrrr i always wanna buy something just to buy something...lol

damn i forgot about knu.....which was the good series to get??? was it the krystal that was the ones to use???

hey when i get this amp should i erplace the old regular brown rcas with some top line stingers or something like that??...would it be worth the swap???

well even though the price was really good im pretty sure ill be pleased with the amp...i know alot of amps are better then the alpine im using right now (mrp-f240) so either way i know im going to see the difference with the extra 60watts a channel especially to my cdt comps.....

they dont....i asked overstock where they got them and they said it was a liquidation that they had got so......they had 178 of em.

ok so im looking at getting a bigger 4channel for my my cdt comps and my 6x9's and my question was how much do you guys think i should put on the cdt's??? I have the cdt ef-61fg's by the way so if anyone could help me out on this it would be great cause i only have a small older alpine 40x4 on everything right now and i know my cdt comps can get alot louder and more clean.O and another thing is that i wanna have ALL speakers amped in my car cause i dont wanna bridge the amp or run a 2channel to the fronts and run the 6x9's on HU power so thats why im lookin for the bigger 4channel. OK NOW I HAVE AN OPTION #2 ok so instead of going with bigger 4channel do you guys think i should use my alpine 40x4 on my 6x9's and tweets and go active with the midbass and just do it that way??? Let me know which way you guys think would be better and what are the advantages and dis of both.If i did go active what EQ would be a really good starter without for a good price and where could i get one?

well i guess we will see cause i went ahead and got it and it came out to like $185 with shipping and the 2yr warranty so ill post some pics up of everything when it comes in......

ok well i ordered the mark antony amp($186 total with shipping and 2yr warranty) about an hour ago so whenever it gets here ill take some pics and post UP.

nah im good cause i need those damn things ya know...MUST HAVE REAR FILL!!!!!

ok them ummmm im gonna order it then...lol

well does anyone know the signal to noise and the THD% or should this be a pretty clean amp even if i cant find the full specs????