oxsign

That box would be just fine for the 10". What amp are you running with it?

I had 4 6" PVC tubes with my 18"s. Yes one was badly tarnished from the sun (no tinted windows).

I'm using 4 of their 6.5 on a sundown 125.2, and they sound awesome.

I had my 2 RL-p 18"s in a 14cube wall after all displacement with an Infinity 1300 on each one in my blazer.

That amp will be plenty for that sub.

Well just for chits & giggles what would it be to 32771 (FL)?

All glass is going to do is crack/break/shatter under the preasures of the sub moving. Not to mention the heat created. If you don't wat to recone it, then I would think about just running 1 sub till you get a new setup. P.S. i'll take it off your hands.

O my fockin god, what did you do to that poor thing?!?!?!?!?! Glass is not going to fix that. I wouldn't even bother. Send it in for a recone.

http://www.****/

I'm sure i'll post it up in there.

OK I'm finally going to begin my build next week sometime. The box will be a center console going from the dash to the back seat with 4 12" RL-p's facing up. My question is should I have the port firing forward towards the dash? Or firing back under the rear seat? This setup is going in an '05 Chevy crew cab. Thx for any help.

I'm sure you meant it to inform/help me, but this is not my first build. I'm also very aware of what it takes to make an SS loud, lol. I didn't think it was necessary but here are the specs. 6.2 cubes after all subs, slot port, and bracing displacement. Tuned to 34Hz. Pushed by a Sundown 3000 @ 2 or .5ohms.

Sound Splinters, Mach5, FI Q, to name a few.

What's the best way to figure out the displacement for each one of these? They will be about 15.75" long & 1.5" in diameter. I used them on the last build I did for the blazer, and they held strong, and were easy to use. So I'm thinking of using them again with my next one. Thx for the help.

I'm trying to figure out my next box. The program I'm using is tells me that my port will be 5Tx10Wx17.5D. Now how much of an effect will it have if I was to change the opening to 3.5Tx11.5Wx17.5D?? I'm looking to tune it to 34Hz. Thx from the help.

The box size is 4.4net after all displacement. So by shortening the shape in one direction, but adding it in the other and not altering the Leigh still changed the tuning?

I really like this idea. Myself, i have never owned anything SSA (nothing personal, lol), but something like this would accually encurage me to buy from you. I have a bad habit of changing things frequintly, and it's a hassel haveing to deal with selling my old stuff. Something like this lets me knpw that I can "upgrade" alot easier. This idea is one of the reasons I finally purchased from Sundown.

I was going to mention this one. It's got something like 24-15"s, and it's for sale too.

LOL, I'll start another thread when I get started on it. I have a few things to work out/figure out. It's going to be a full coulsole from front to back. So I want it to look right/good.

I'm going to be running 4 Signature 12"s ported and the most I can muster up for each is 1.25 cubes ported to 33Hz with 500w to each. Is this going to be sufficient air space for them to function properly?

I've been waiting for you to chime in Mike, LOL. So 1.5 with about 450w tuned to 33-34Hz. I'm going to see what I can pull off then.

Box size, tuning, amp, power, electrical?!?!?!?!?! questions like these shouldn't be asked without all the info.

Ok I did some measuring and if I cut the rear seat (make it 2 buckets out of the 60/40 bench seat), I would have enough to give them 1.55 each after displacement. What are your thoughts on that?

OK, I just checked, and they are both double slugs.

I was wondering between the 2 subs was there any difference in specs? I have 2 sitting here, and of course the only visible difference is the cone. One with the logo, and the other with Mike's sig.