sefugi

Happy B-day!!

Looks Great!!! Were's the vid? Oops, got it now!

"Silly b**** yo wepons cant harm me do u know who the f*** i am IM THE JUGGERNAUT!!"

Great info!! Thanks for taking the time to share.

You should like that gauge, installed some of their units in my son's car and liked them. Keep up the great work!! Love the pics!!

Off the SSA site: •Dual 4-ohm Coils Available Depth = 6.5" Cut-Out = 10 15/16" Enclosure Suggestions: 1.75 ft^3 ported tuned to 30 Hz -- F3 of 26 Hz * Tune higher and use a smaller box for more SPL oriented setup (Use 1 - 1.5 cubes) * Enclosure can be as big as 2.25 ft^3 with lower power levels

Your going to give that mtx sub a "little guy" complex! Put him buy a tweeter so he'll feel better. Nice subs, now build a box!!

Very nice!!! Working with a set of SA-8's myself. Tuned in!!

They will be here today around noon. Pics to follow later today! Bring it on!!! Always love me some woofer porn!!

SIC!! Don't know what I was thinking but didn't realize those were going under the truck. Very Nice!!

Thanks!! Well I did cut some corners on the quality of the headunit and it bit us in the but. That has been corrected and the results are excellent. My son has a great appreciation for quality work now. When lookiing at a vehicle he has an eye for noticing detail and acknowledging the effort put into it.

Got more in store, but Grasshopper must be doin' the work thing lately.

Builder handled the motor once we pulled it. Problem with the cam, ate a couple of lifters. I think it was a bad grind, but can't say I never saw it before or after. Grasshopper figured since it needed a new cam he would put in a roller cam. Zinc in the motor oil today is partly to blame, (the lack of it) Also when starting a motor with a flat tappet for the first time it should be run around 2000 2500 rpm for the first 30 minutes with Break-In Oil Additive. but with a roller cam no such problems That's why we were pretty blown away about this situation, because we added zinc and ran a breakin of 30 minutes @ 2200rpm. Oil pressure looked ggod the whole time, it wasn't till the next day or so and the oil pressure had dropped. Like you said, with the roller it is a done deal. Thanks for the post! First time I looked in on this build. No surprise on the quality. You guys are kicking as on this one. The cam issue seems to be becoming an all to common problem these days. In the last few years I've had at least 3 different guys do motor rebuilds and wond up with the cam being eaten up. They all did proper break in with the "good" break in oil that has the added zinc also. I won't do anything besides a roller from here out, todays cams are straight garbage and need all the help you can give them to hold up. I saw this same isssue on a Ford motor about 6 months ago, guess this is becoming an issue now. Never had issues like this "back in the day". Roller cam seems to be doing well, course havn't heard much out of Grasshopper lately.

That's a serious brace, I assume this is to secure the enclosure to the back of the cab? Great work on the box for being in the elements of the bed!

I have tried the less expensive route, and I pretty much got what you can purchase at AutoZone for 89.99. I spent about what you are referring to as price and for another 100-125 I could have had a Quality alt. to start with. We learn from our mistakes and hopefully the mistakes of others. Good Luck.

Great pics!! Thanks for sharing. Went through Breakenridge back in the day on my honeymoon.

Welcome!!

Tuned in!!

2 AQX3500's Thanks man!! That'll give

Great Work !! That ought to be one hell of a difference to what you have had for your sub stage!!

Gonna be a shame to put a body covering up such a beautiful frame!