sefugi

to SSA!!!!

From the begining question that you have asked the members here have given answers. The main responce has been that the correct enclosure size will matter more than how many/size subs. You have posted above you have had bad luck in the past, don't continue in the same direction. It takes more than some subs and an amp to attain what I beleive you are looking for, and the responces above reflect that. As ///M5 stated: "Again, post your space first BEFORE any other questions. Without knowing there is NO answer. Install is everything." Then Sir Lancelot stated: "You WILL actually get some help around here, but it is up to you to give us something to work with. The more specific and detailed you are, the happier you will be in the end!!!!!" Start with what you have and were you want to go, then it will be easier to help fill in the blanks and add to them...

Yeah, you missed 2...

If the "Big 3" has not been done, you did not say, this will help with your voltage.

HAPPY BIRTHDAY!!!!!

to SSA!!!!

yeah i have enough room lol i have a 10 inch box behind my seat lol with room to spare and those 12s are only 6/4 deep Depth for the drivers is NOT what is required for room. To answer your question you first should post the maximum size box you can fit. And 6.5" deep for a driver + pole vent clearance 1" + MDF front and back 1.5" + excursion clearance 3" = 12" depth, but again that is unimportant as volume/cubic feet determine what you can run. For instance, keeping everything else equal an 8" sub in an optimal box will be louder than the same series of sub in a 12" size in a box that is too small. Install is EVERYTHING and that means building a box that is specific to your drivers. Box first, ALWAYS. ^^^^What ///M5 said!!!!

WOW!! That is the second one I have seen here on the forum in the last week or so. Did they have a give away that I did not hear about? That is a massive amp!!!! What's it going to power?

Welcome!!!!

I have used that program and selecting the "# of port walls" changes the outcome of the Net Volume and the Tuning Frequency so check the Help section of the program for more info.

Sounds like your plan is coming together, waiting for pics and the start of your build!!

Looks sic!!!! Got Power??

to SSA Forum!!!

Nice ride!!! Lot of equipment in it as well!!

thats a bad ass amp right there man, you should grab it if I were you Give us your goals, budget for amp and final ohm load you plan on using for starters and any more information to make this effective. budget is probly about 500 dollars right now. final ohm load is just 1 ohm i believe and i eventually will upgrade electrical if needed What kind of power do you have right now? What kind of wire do you currently have ran? we need to know this so that we can make sure that we dont recommend an amp that is 0 gauge when you only have 4 ran through the car. To have enough of an amp to push 2 ICONS he will probly need 1/0 power cable, and if he was to go with a deal on a Sundown 1500 he could run a 1/0 cable!

Happy New Year!!! You guys need a little down time!!

Couple great deals on SAZ1500's in the "For Sale" section...

^^^^^What he said!!!!!