Jump to content

jjcross45

Members
  • Content Count

    32
  • Joined

  • Last visited

Community Reputation

0 Neutral

About jjcross45

  • Rank
    Newbie

Profile Information

  • Gender
    Male
  • Location
    oklahoma
  • Interests
    subbb
  1. jjcross45

    What should i be expecting???

    i need some feedback about DB wise please
  2. So i had 2 l7 12s under my back seat... it was weak... so i took the backseat out and i told my buddy brian to build me a box (brian owns and manages evolutiuons car audio Lone Grove, OK) but anyways, i was expecting a huge box, instead he said 2 ported boxes at 3.3 cub would create the loudest setup at all possibilities. ill be pushing the l7s with a kicker 1500.1 zx. how loud am i looking? as far as DB wise... and was his plan correct??
  3. jjcross45

    Ideal Amp?

    yes sir. thanks for advice
  4. jjcross45

    Ideal Amp?

    probably 2 ohm
  5. jjcross45

    Ideal Amp?

    well see i already have a zx1500 pushing 2 l7s so i figured id ask
  6. jjcross45

    Ideal Amp?

    Would a Kicker 750.1 zx be an ideal amp for a 15" 4 0HM L7?
  7. i had a blown speaker this entire time cause im a dumbass
  8. i really wanna add a secondary battery asap. and my alt is 105 i believe. there is 4 terminals on the sub, i wired it neg with white dot to red without dot. and red with dot and black without to amp. on both subs. could this be an issue?
  9. the redtop is the main, i have no auxillary, and no on the big 3
  10. excuse me. thats the picture i actually meant to post,
  11. I finally got my system bought and all put together today!! 2 2 0hm 12 inch L7s Kicker zx 1500 streetwires powerstream 0/1 300A anl fuse optima redtop so the problem is... i turn my truck on, system turns on fine, as i turn the bass up, it shuts off, i turn it down, it gradually comes back on after a few seconds. And does the same thing each time. i grounded it to the seatpost bolt ( which i found out briefly agok, IS NOT ATTACHED TO THE FRAME) i Wired the subs down to 1 ohm each, equalling a 2 ohm load, but the weird thing is, is that the12volt.com said to wire it one way (for 2 ohm load) and kicker said to wire another way?????? so i went with this way- as oppossed to the kicker way. Why is my amp shutting off? bad ground? bad amp? bad wiring? please help
  12. im running 0 gauge, from redtop, to a kicker 1500. which the battery terminals are 2 i believe. more or less, am i gonna be using power if i use gauge reducers?
  13. that tells me everything
  14. does it make a difference using 10 gauge speaker wire and 14, as far as performance goes? running to L7s off a kicker 1500.1
  15. jjcross45

    pics possible?

    I was hoping for more...
×